Key benefits Fully automatic weld and cut operation reduces manual steps and speeds up packaging. tightening force and adjustable pull setting adapt to light and heavy duty jobs. Lightweight and rechargeable for portable use at warehouses, construction sites, and outdoor locations. Simple controls make it usable by non professionals while delivering consistent results. How it works Insert the strap into the baler, press the tension button to tighten, then press the welding switch. The tool automatically melts the strap to form a weld and cuts off the excess strap. Typical cycle time allows bundling a pack of timber in less than 1 minute. Main features and performance Compatibility: Designed for PP and PE straps, width 11 to 16 mm and thickness 0.4 to 1.2 mm (0.01 to 0.04 inch). Adjustable tension: Manual knob sets pulling force from 900 to 3200 N to match strap type and load. Rechargeable power: 4000 mAh lithium battery, up to 2000 recharge cycles. Full charge in 90 minutes provides about 2 hours of operation and packs approximately 250 to 350 straps per charge. Portability: Machine plus battery weighs 6.6 lbs, allowing one person to handle heavy duty packaging tasks easily. Automation: Large tightening force and automatic welding and cutting streamline heavy duty packaging. Practical applications Timber bundling: Fast, repeatable strapping for stacked lumber at sawmills or lumber yards. Pallet and carton securing: Tighten and seal straps around pallet loads or multiple cartons in warehouses and distribution centers. Construction materials: Bundle rebar, pipes, or other building materials on site without needing mains power. What you get in use Reduced labor time and fewer manual adjustments. Consistent weld quality and secure seals for transported or stored goods. A single portable tool that works wherever rechargeable power is available. Specifications Strap compatibility: PP and PE strap, width 11 16 mm, thickness 0.4 1.2 mm (0.01 0.04 inch). Pulling force range: 900 3200 N, adjustable via knob. Battery: 4000 mAh rechargeable lithium battery, up to 2000 charge cycles. Charge time: 90 minutes. Runtime per full charge: about 2 hours, approximately 250 to 350 straps. Weight: 6.6 lbs including battery. Notes for operation Use only compatible PP or PE straps within the specified size range. Adjust the tension knob to match strap strength and load requirements. Follow safe handling practices for a hot welding area during and immediately after operation.