— Veneer (backing and packaging details)Key benefitsProtected backing: The back of the veneer is finished with a thin layer of non-woven fabric or otherwise protected. This reduces surface damage and keeps the face layer ready for installation or finishing.Exception clearly stated: Veneers with a thickness of 0.5 mm are supplied without the non-woven backing; they are handled and protected accordingly.Ready-to-use rolls: Products are carefully packed on rolls and protected with wall-cladding material or cardboard paper for transport and storage, minimizing creasing or edge damage and simplifying handling on-site.What this means for youEasier handling and reduced waste: Protected backs and roll packaging reduce the risk of scuffs, splits, and transport damage, so more of your material arrives usable.Faster on-site preparation: Backing protection preserves the veneer during cutting, trimming, and adhesive application, helping maintain consistent results.Clear choice for thin veneers: If you order the 0.5 mm option, expect a bare back by design — plan adhesive and handling accordingly.Attributes (function, compatibility, size, material, performance)Function: Decorative and protective surface veneer supplied in roll form.Material: Veneer with either a thin non-woven fabric backing or a protected back; 0.5 mm thickness is supplied without non-woven backing.Size/format: Supplied on rolls for ease of transport and installation; roll dimensions follow order/specification.Packaging: Each roll is wrapped with wall-cladding material or cardboard paper to protect edges and faces during shipment and storage.Performance: Packaging and backing choices are intended to preserve surface quality and reduce handling damage. For the 0.5 mm product, account for the lack of non-woven backing when planning adhesion and finishing.Typical applicationsWall cladding and interior panels: Use the rolled veneer for decorative wall finishes where consistent surface appearance and minimal handling damage are important.Cabinetry and furniture facings: Ideal for surfacing cabinets, doors, and furniture components that require a protected face during transport and installation.Trim, displays, and fixtures: Suitable for sample boards, retail displays, and lightweight fixtures where veneer is needed in roll form for efficient application.Practical notesVerify thickness before ordering to confirm backing type; 0.5 mm veneers do not include the non-woven backing.Store rolls flat or upright as recommended for your site to avoid deformation; keep packaging in place until ready to apply.Unpack carefully to preserve edges and face; packaging of wall-cladding or cardboard paper should be retained until installation to maintain protection.