Lantern: Water Level Sensor Switch Suitable For: Homes, air-conditioned rooms, beauty salons, hotels, hospitals, offices, kindergartens, and karaoke rooms. How to Use: 1. Place the unit on a clean water container. Do not use purified or distilled water. Ensure the atomizing head is fully submerged and lying flat on the water surface. 2. Water depth should cover the sensor’s black-marked area by 1–2 cm. Excessive water depth may prevent misting. 3. Turn on the power to begin misting. Avoid splashing water onto the power source. Notes: 1. The spray head requires a 24V/800mA power supply to operate. It cannot function without this power source. 2. The product housing is zinc alloy with electroplated finish. The spray head is made of plastic. Avoid using abrasive cleaners on the surface to prevent scratches (scratches do not affect functionality). 3. Atomization performance is affected by water temperature. Initial mist output may be low; after a few minutes of operation—or when using slightly warm water—performance improves significantly. 4. Fill the water container to a level between 2–7 cm. Overfilling reduces efficiency; levels below 2 cm result in weak or no mist output. Humidification Method: Ultrasonic Mist Discharge Noise Level: 400 mL/hour Operating Voltage: 24 V Power Consumption: 19 W