Automatic Melting Strapping Tool for Fast, Secure Packaging Key benefits Fully automatic weld and cut: Insert the strap, press the tension button, then press the welding switch. The tool automatically welds the strap and cuts off excess, producing a secure seal in seconds. automation, low skill required: Designed for non professionals. Large tightening force and simple controls let users pack heavy loads quickly and consistently. Lightweight and portable: The machine plus batteries weigh only 6.6 lbs, making handheld operation easy for users with limited strength. Saves time and labor: Fast cycle times let an operator bundle items such as timber in under 1 minute. Main features Function: Automatic melting weld and cut. Tension button for strap tightening and welding switch for automatic weld and cut. Compatibility: Works with PP and PE straps 1316 mm (0.510.63 inch) wide and 0.51.2 mm (0.020.04 inch) thick. Adjustable tension: Manual knob allows setting pulling force up to 2800 N for heavy duty packaging. Power and runtime: Includes two 4000 mAh rechargeable lithium batteries. Each battery can be recharged about 2000 times. Full recharge takes 90 minutes. With fully charged batteries the tool can run for approximately 2 hours and strap about 250 to 350 belts. Portability: Handheld design for use in warehouses, loading docks, farms, or outdoor job sites. Practical applications Timber and lumber packs: Tighten and seal bundles of timber quickly and reliably on site. Pallet and carton securing: Fast, repeatable strapping for palletized loads and heavy cartons before transport. Construction and industrial materials: Bundle pipes, metal profiles, and other long or heavy items where a strong, adjustable tension is required. Why this tool solves common problems Reduces manual effort and operator fatigue with automated weld and cut and strong tightening force. Minimizes rework and loose straps by producing consistent welds and exact tension settings. Enables mobile operation away from mains power thanks to fast charging batteries and substantial runtime. What to expect Simple three step operation: feed strap, press tension button, press welding switch. Reliable compatibility with common PP and PE strap sizes listed above. Adjustable tension up to 2800 N for a wide range of packaging needs. Technical summary Strap compatibility: PP/PE 1316 mm wide, 0.51.2 mm thick Maximum pulling force: adjustable up to 2800 N Batteries: two 4000 mAh rechargeable lithium batteries, approximately 2000 recharge cycles each Charge time: 90 minutes Runtime per full charge: about 2 hours or 250 to 350 straps Weight with batteries: 6.6 lbs This tool is intended for efficient, professional style strapping where portability, speed, and adjustable tension are required.