Light panels Key benefits light transmission for bright spaces: up to 85 percent transparency for natural daylight comparable to glass. Flexible installation: panels are bendable and easy to cut, allowing cold bending on site to form arches, semicircles, roofs, and window covers. They can also be hot bent when needed. Durable and impact resistant: reinforced with glass fibre for toughness and improved load bearing against debris and hail. Weather resistant and long lasting: panels include a nominal 20 micron UV film to help resist yellowing and fogging in sunlight. Product highlights Product name: Light panels Size: 1.5 x 30 m per roll Thickness: 0.8 mm Color: A Material: resin and glass fibre (FRP) Transparency: up to 85 percent Flame retardancy: flame retardancy Toughness: toughness with steelstyle reinforcement in the core Bending: minimum bending radius is 175 times the panel thickness. For 0.8 mm thickness this equals 140 mm. Panels can be cold bent on site or hot bent as required. Temperature performance: suitable for a wide temperature range, resistant to temperature variations Package content: FRP light board x 1 roll Typical applications Sun room or conservatory roofing to admit natural light while maintaining structural stiffness Bus stop shelters and outdoor canopies where impact resistance and light transmission are needed Rain screen cladding, skylights, verandas, and covered walkways that require lightweight, weatherresistant panels Installation and handling Panels are easy to cut with standard tools. Follow the minimum bending radius guidance to avoid cracking when cold bending. Position UVcoated side outward for resistance to yellowing. Handle with care to avoid surface scratches and store flat or on a suitable support to prevent deformation. Customer support If there are any quality issues or the product does not match the description, please contact the seller for a satisfactory resolution.