Pure Sine Wave Inverter 12V to 110V 5000W Continuous 10000W Peak Key benefits Delivers clean, stable AC power for sensitive electronics by converting 12V DC to 110V AC with a pure sine wave output. Provides 5000W of continuous power and handles 10000W peak loads to start motors, compressors, and other inrush devices. Improved conversion efficiency reduces energy loss and helps extend battery runtime compared to less efficient inverters. What it does Converts 12V DC input to 110V AC output suitable for household and professional equipment. Produces a pure sine wave output that closely matches utility power for reliable operation of electronics, audio equipment, and medicalgrade appliances where precise waveform matters. Performance and compatibility Continuous power: 5000W for sustained operation of multiple appliances. Peak power: 10000W to accommodate startup currents from devices like refrigerators and power tools. Compatible with common 12V battery systems used in vehicles, RVs, boats, and offgrid setups, supplying standard 110V AC to connected equipment. Practical features Stable pure sine wave output for low noise and improved performance with sensitive devices. peak capacity for equipment with large startup demands. Designed for use with standard 12V battery banks and 110V AC appliances. Use scenarios RV or camper setup: Run air conditioners, microwaves, televisions, and charging equipment while off the grid. Job site or mobile workshop: Power heavyduty power tools and compressors that require starting current. Home backup for essential loads: Support refrigerators, sump pumps, lighting, and communication devices during outages. Why choose this inverter Provides true 5000W continuous power with a 10000W surge capability to handle both steady loads and demanding startups. Pure sine wave output minimizes interference and protects sensitive electronics. Efficient conversion improves runtime and reduces waste heat compared to less efficient designs. Basic installation note Connect to a 12V battery source and route the 110V AC output to your equipment using appropriate wiring and fusing for the expected load. Follow standard electrical practices and consult a qualified electrician for permanent installations.