Metal Detector (US Plug) Overview A portable, sensitivity metal detector designed for wideranging search and accurate location work. Built from durable ABS material and driven by microelectronic processor controls, this system combines longrange remote detection with precise localizing capability. It ships with builtin rechargeable batteries for both the detector and the receiver. Key benefits Longrange search: Maximum search range approximately 1500 m (4921.3 ft) for remote detection of targets. Deep detection capability: Maximum detection depth approximately 30 m (98.4 ft) under conditions. Accurate localizing and metal identification: Frequency modulator and remote search system help distinguish metal types and pinpoint buried objects. Reliable electronics: Microelectronic processor handles chip calibration and instrument selftest for stable, repeatable operation. Durable construction: Housing made from quality ABS for impact resistance and extended service life. Ready to use: Detector and receiver with builtin 12.6 V 2000 mAh lithium batteries. Technical specifications Item type: Metal detector Size: US Plug Material: ABS Detector battery: 12.6 V lithium battery x 1, capacity 2000 mAh, built in Receiver battery: 12.6 V lithium battery x 1, capacity 2000 mAh, built in Search range: Maximum approx. 1500 m (4921.3 ft) Detection depth: Maximum approx. 30 m (98.4 ft) Transmission frequency: 433 MHz Performance and features sensitivity and stability for detecting a wide range of metal targets. Remote search system combined with an accurate location detection system to reduce search time and increase confidence in results. Frequency modulation allows differentiation between types of metal to help prioritize targets. Selfcalibration and testing routines managed by the onboard processor to simplify setup and maintain consistent detection performance. Compact, rugged ABS design resists wear and supports field use. Basic operating guidance Hold the instrument firmly and scan slowly in an arc while rotating your body. Keep your elbow close to your side and sweep at an angle of about 40 degrees to 60 degrees. Maintain a steady, standardized scanning motion. Fully extend the receiving antenna and position it in front of you with your body turned roughly 90 degrees to the antenna to avoid interference from body movement. Move slowly and keep the detector stable. When the antenna aligns with a target, the system will indicate the location so you can narrow down the position. Typical use scenarios Security checks: Remote screening of areas and rapid localization of metallic threats or contraband during inspections. Archaeological and treasure hunting: Detect and locate buried artifacts or historical metalwork at excavation sites and survey areas. Prospecting: Search for buried metal veins, caches, or equipment in exploration and field prospecting operations. What you get Metal detector unit with builtin 12.6 V 2000 mAh lithium battery Receiver with builtin 12.6 V 2000 mAh lithium battery Readytouse system optimized for remote search and precise localizing This metal detector is suitable for professional and hobby use where reliable longrange detection, clear localization, and durable construction are required.