Automatic Cordless Pool Cleaning Robot Overview This cordless rechargeable underwater cleaning robot filters and cleans the pool bottom without changing the water. It follows a regular programmed path, delivers efficient cleaning, and offers long battery life for uninterrupted operation. Key benefits True cordless operation: rechargeable and fully underwater capable, no tether required during cleaning. Deep cleaning performance: two large suction gates and rotating bottom brushes capture and lock in dirt and sand. Fine filtration: built in 16 micron filter collects fine particles for cleaner pool water and less manual skimming. Smart and reliable start up: long press the power switch to initiate a self test that verifies the indicator light, motor, and buzzer. Automatic docking: returns to a corner or pool edge when the cycle finishes or battery runs low, making retrieval and recharging convenient. Main features Automatic navigation: follows a regular cleaning path for complete bottom coverage and consistent results. density cleaning: suction gates working with bottom brushes gather and secure debris while the fine filter traps small particles. Easy operation: press and hold the power switch on the bottom of the main unit for 2 to 3 seconds to turn on or off; a hardware self test runs at power up. Intelligent docking and standby: the built in program directs the robot to dock at the pool perimeter when cleaning completes or power is depleted. Refer to the instruction manual for specific charging and maintenance procedures. Practical use scenarios After a pool party: remove sand, leaves, and settled dirt from the pool floor to restore swim readiness. Routine maintenance: schedule regular cleaning cycles to reduce manual brushing and skimming between deeper cleanings. Seasonal preparation or after storms: quickly recover pool floor cleanliness by running an automatic cleaning cycle. What you get A cordless underwater cleaning robot that filters and removes bottom debris without draining or changing pool water. Automated operation with long runtime, regular path planning, and effective capture of fine dirt down to 16 micron. Operation notes To power on or off, long press the power switch on the bottom of the main unit for 2 to 3 seconds. On power up the indicator light, motor, and buzzer perform a self test to confirm normal operation. When the robot finishes a cleaning cycle or the battery is low it will automatically navigate to a corner or edge for retrieval and charging. Consult the included instruction manual for charging, filter cleaning, and maintenance procedures. This robot is designed to simplify pool bottom cleaning by combining cordless freedom, automatic navigation, and fine filtration for improved pool maintenance.