WF45M5500AP Washer Door Boot Seal Replacement with Secure Retaining Wire for Leak Prevention

22.95 CHF
+ 7.99 CHF Livraison

WF45M5500AP Washer Door Boot Seal Replacement with Secure Retaining Wire for Leak Prevention

  • Marque: Unbranded
Verkocht door:

WF45M5500AP Washer Door Boot Seal Replacement with Secure Retaining Wire for Leak Prevention

  • Marque: Unbranded

22.95 CHF

Économisez 11.00 CHF (32%)

Prix de vente recommandé

33.95 CHF
En stock
+ 7.99 CHF Livraison

Politique de retour sur 14 jours

Verkocht door:

22.95 CHF

Économisez 11.00 CHF (32%)

Prix de vente recommandé

33.95 CHF
En stock
+ 7.99 CHF Livraison

Politique de retour sur 14 jours

Modes de paiement:

Description

WF45M5500AP Washer Door Boot Seal Replacement with Secure Retaining Wire for Leak Prevention

WF45M5500AP/A511 Washer Boot Gasket Seal Diaphragm with Retaining Wire Condition: : A brand, unused, unopened, undamaged item in its original packaging Product overview This replacement washer boot gasket seal diaphragm with retaining wire restores the watertight seal between the front door and wash drum for compatible models WF45M5500AP and A511. The assembly combines a flexible sealing flange and an internal retaining wire to hold the gasket securely in place and maintain consistent sealing performance. Key benefits Stops leaks and prevents water damage by restoring a proper door seal. Stabilizes the boot shape for reliable closing and reduced wear over time. Easy swap replacement using basic tools for a fast without replacing the entire tub assembly. and unused, supplied in original packaging for straightforward installation. Important attributes Function: Creates a watertight barrier at the door opening and secures the boot to the front panel using the retaining wire. Compatibility: Designed for use with washer models WF45M5500AP and A511. Verify model number before . Construction: Flexible gasket body combined with a formed retaining wire for secure installation and consistent fit. Performance: Restores original fit and sealing function when installed correctly, reducing the risk of detergent leaks and floor damage. Typical use scenarios a torn or hardened boot gasket that is allowing water to leak during wash cycles. Perform routine maintenance while servicing the front load drum or door assembly to ensure a long lasting seal. a water leak after a collision with the door or during removal and reinstallation of the front panel. Installation notes Inspect the door lip and mounting channel for debris or damage prior to fitting the gasket. Follow manufacturer service instructions or consult a qualified technician if unsure about removal and reinstallation steps. Test with a short wash cycle to confirm a proper seal before regular use. This product is supplied and ready for installation on compatible models WF45M5500AP and A511.
  • Identifiant Fruugo: 462960550-974182177
  • EAN: 6091977897315

Livraison & retours

Expédition dans les 24 heures

  • STANDARD: 7.99 CHF - Livraison entre jeu. 05 février 2026–ven. 13 février 2026

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Guangzhou Wanguan Technology Co., Ltd.
  • Guangzhou Wanguan Technology Co., Ltd.
  • Room 201, No. 51, Lianyuan Road
  • Licheng Street
  • Guangzhou
  • CN
  • 511300
  • Nepwoq46@hotmail.com
  • 8618018763638

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • IBERTRUST GLOBAL SOCIEDAD LIMITADA
  • IBERTRUST GLOBAL SOCIEDAD LIMITADA
  • C/ PABLO IGLESIAS 1A ENTRES
  • CASTELLON DE LA PLANA
  • Spain
  • ES
  • 12003
  • contact@ibertrust.info
  • 34611904867