Portable Automatic Melting Strapping Tool for PP and PE Bands A handheld, battery powered strapping machine that tightens, welds, and cuts plastic straps automatically for fast, secure bundling. Designed for automation so non professionals can achieve consistent results with heavy duty packages while saving time and labor. Key benefits Fully automatic weld and cut: Insert the strap, press the tension button to tighten, then press the welding switch. The tool automatically melts the strap joint and trims excess, producing a reliable seal in seconds. tightening force and adjustable pull: Manual knob allows pulling force adjustment from 0 to 3200 N to match different loads and strap types. Lightweight and easy to handle: Complete unit with battery weighs 6.6 lbs, allowing one person to operate comfortably. Portable rechargeable power: Built in 4000 mAh lithium battery supports about 2 hours of outdoor work after a 90 minute charge, and can strap approximately 250 to 350 belts per full charge. Battery rated for about 2000 recharge cycles. Compatible strap sizes: Works with polypropylene and polyethylene straps 10 to 16 mm wide and 0.4 to 1.2 mm thick (0.39 to 0.63 inch wide, 0.01 to 0.04 inch thick). Main functions and performance Automatic melting welding and cutting for neat, secure joints. Tension button for quick tightening, welding switch for automatic joint formation, and excess strap trimming in one cycle. Large tightening capacity suitable for heavy packing tasks while remaining operable by non specialists. Adjustable tension knob for precise control over strap force depending on load and strap material. Technical specifications Strap compatibility: PP and PE straps, 10 16 mm width, 0.4 1.2 mm thickness (0.39 0.63 inch wide, 0.01 0.04 inch thick) Tension range: 0 3200 N (adjustable) Battery: 4000 mAh rechargeable lithium, approximately 2000 charge cycles Charge time: 90 minutes Operation time per full charge: about 2 hours Straps per charge: approximately 250 350 cycles Total weight with battery: 6.6 lbs Practical applications Timber and lumber bundling: Tighten and weld straps around stacked boards or planks for storage and transport, typically completed in under one minute per bundle. Warehouse pallet securing: Fast, repeatable strapping of boxes and pallet loads for preparation. Construction and building sites: Portable strapping for onsite bundling of rebar, tubing, or packaged materials where corded power is unavailable. What this tool solves Reduces manual effort and time compared with manual tensioners and sealers by combining tightening, welding, and cutting in one automated cycle. Delivers consistent strap tension and joint quality even when used by non professional operators. Enables mobile strapping operations thanks to a rechargeable battery and lightweight design. Included functions only reflect the product features described. Follow strap manufacturer recommendations for strap type and thickness when setting tension.