This USB3.0 19PIN to TYPEE 20PIN adapter card is designed to extend a frontpanel TypeC USB port by using a motherboard USB3.0 19PIN header through the chassis TYPEE cable and an installed PCI bracket adapter. Key benefits Enables frontpanel USBC access on systems where the motherboard has not been updated to include a front TypeC header. Provides a stable, direct connection between the USB3.0 header and a TypeC frontpanel port without software drivers. Mounts in a PCI bracket for a clean, unobtrusive upgrade to your chassis. What it does Converts the USB3.0 19PIN header to a TYPEE 20PIN connection and routes the signal to a TypeC frontpanel interface via the chassis cable. Installed in a PCI bracket, it makes it easy to connect a Ctype port to your front panel. Performance Supports USB3.0 speeds with GEN1 signaling up to 5 Gbps. The 19PIN header is designed for USB3.0 performance (5Gbps), and this adapter preserves that capability when connected to a TypeC front port. Compatibility Works with all USB3.0capable systems. Requires a motherboard or expansion card with a 19PIN USB3.0 socket and a chassis with a TYPEE cable. Installation Easy to install as an extension/port. No driver installation required; plugandplay. Use scenarios Upgrade a desktop case to provide a native USBC frontport when the motherboard lacks a front USBC header. Add a convenient frontpanel USBC connection for a USBC hub, external SSD, or other USBC devices by routing through the chassis and PCI bracket. Retrofit older systems to add modern USBC access without replacing the motherboard or chassis. Notes The adapter is designed to extend the front USBC interface via the 19PIN USB3.0 header and TYPEE cable, maintaining compatibility with standard USB3.0 infrastructure.