Automatic Melting Strapping Tool for fast, secure plastic banding. This handheld electric strapping machine automatically welds and cuts straps after tensioning, making packing faster, simpler, and more consistent. Key benefits Automated weld and cut: Insert the strap, press the tension button, then press the welding switch. The tool automatically welds and trims excess strap for a secure finish. Saves time and labor: tightening force and fast cycle time let a single operator complete common packaging tasks quickly. A pack of timber can be strapped in under one minute. Easy to use: degree of automation makes the tool suitable for nonprofessional users as well as trained operators. Lightweight and portable: The machine with battery weighs 6.6 lbs, allowing users with limited strength to handle it comfortably. Battery powered for field use: Rechargeable 4000 mAh lithium battery, up to 2000 charge cycles. Full charge in 90 minutes yields about 2 hours of operation, sufficient to strap approximately 250 to 350 belts per charge. Features and performance Compatible strap sizes: Works with PP and PE straps 11 to 16 mm wide and 0.4 to 1.2 mm thick. Adjustable tension: Pulling force is adjustable from 900 to 3200 N using the manual knob to match different cargo and strap specifications. Rapid operation: Tension, weld, and cut sequence completes automatically after input commands, reducing cycle time and operator fatigue. Strong clamping and weld quality for heavyduty packaging applications. Specifications Power: Rechargeable lithium battery, 4000 mAh, recharge time 90 minutes. Runtime per charge: Approximately 2 hours or 250 to 350 straps per full charge. Weight: Machine plus battery 6.6 lbs. Strap compatibility: PP/PE straps 1116 mm wide, 0.41.2 mm thick. Tension range: 9003200 N (adjustable). Typical applications Timber and lumber bundling: Fast, repeatable strapping for bundles on site or in the yard. Pallet and carton securing: Suitable for packaging lines and warehouse operations where quick, reliable banding is needed. Construction site and outdoor use: Portable power and battery operation enable strapping where mains power is not available. Operation overview 1. Feed strap through the baler as instructed. 2. Press the tension button to tighten the strap to the desired level. 3. Press the welding switch. The tool will weld and automatically cut off excess strap. Why this tool Combines automation, portability, and adjustable force to reduce cycle time and physical effort. Compatible with common PP and PE strap sizes and suitable for a range of industrial and field packaging tasks. Simple controls and a lightweight design make it accessible to a broad range of users without sacrificing performance.