Portable electric strapping tool that tensions, welds, and cuts PP and PE straps automatically for fast, reliable bundling and palletizing. Key benefits Automatic welding and cutting: insert the strap, press the tension button, then press the welding switch. The tool tightens, welds, and trims excess strap automatically for consistent results. automation, low skill required: designed for easy use by nonprofessionals while delivering the tightening force needed for heavyduty packaging. Saves time and labor: fast cycle times let an operator bundle a pack of timber in under one minute, increasing throughput on the job. Lightweight and portable: the machine plus battery weighs only 6.6 lbs, making it easy to operate for extended periods and suitable for outdoor or mobile work. Specifications and performance Compatible strap material: PP and PE belts. Strap size compatibility: 12 to 19 mm wide, 0.5 to 1.0 mm thick (0.47 to 0.74 inch wide, 0.02 to 0.04 inch thick). Adjustable pulling force: up to 4500 N using the manual tension adjustment knob. Power source: two 6000 mAh rechargeable lithium batteries. Battery life and charging: full charge in about 100 minutes, approximately 2 hours of operation, and about 300 to 350 straps per full charge. Each battery can be recharged up to 2000 times. Weight: 6.6 lbs including battery. Operation steps Feed strap into the baler. Press the tension button to tighten. Press the welding switch to weld and cut automatically. Typical use scenarios Timber yards: quickly bundle stacks of lumber for storage or transport. Warehouses and logistics: secure pallet loads and large parcels for shipment. Construction and landscaping: tie bundles of pipes, rods, poles, or bundled materials on site. This handheld electric strapping tool combines portability, adjustable tension, and a reliable automatic weld and cut function to streamline packaging tasks in industrial, agricultural, and field environments.