Portable Automatic Electric Strapping Tool Key benefits Fully automatic weld and cut operation: Insert the strap, press the tension button, then press the welding switch. The tool automatically welds the strap and cuts off excess for a secure finish. Fast and efficient packaging: tightening force and automated cycles allow bundling of timber or pallet loads in less than one minute, reducing labor time. Easy for any operator: degree of automation makes the tool usable by non professionals with the same result as experienced users. The complete unit with battery weighs only 6.6 lbs, so it is easy to handle for prolonged tasks. Function and performance Tension range: Adjustable pulling force from 900 to 3200 N using the manual control knob to match different strap strengths and load requirements. Strap compatibility: Works with PP and PE straps 11 to 16 mm wide (0.43 to 0.63 inch) and 0.4 to 1.2 mm thick (0.01 to 0.04 inch). Operation flow: Load strap, press tension button to tighten, then press welding switch for automatic melt welding and automatic cut off of excess strap. Battery powered for mobility: 4000 mAh rechargeable lithium battery. Typical charge time 90 minutes. Continuous operation up to 2 hours on a full charge. One charge can apply approximately 250 to 350 straps depending on tension settings and strap size. Battery life rated for about 2000 recharge cycles. Design and usability Lightweight handheld design at 6.6 lbs including battery for easier handling on sites and in warehouses. Large tightening force suited for heavy duty packaging of timber bundles, pallets, and bundled construction materials. Simple controls and clear adjustment enable quick setup and consistent results across repeated jobs. Materials and compatibility Designed for polypropylene and polyethylene plastic strapping within the specified width and thickness ranges. Suitable for standard industrial and logistics strap types meeting those dimensions. Typical applications Timber yards and sawmills: Fast, consistent bundling of lumber and treated wood for storage and transport. Warehouses and distribution centers: Secure pallet strapping and unitizing of boxed goods for shipment. Construction sites and metal suppliers: Bundling rebar, pipes, or profiles where a portable, battery powered strapping solution is needed. What this tool solves Reduces manual effort by automating tensioning, welding, and cutting steps. Improves packing speed and consistency across operators with minimal training. Enables portable strapping work in locations without mains power due to long battery runtime. Specifications summary Strap type: PP PE Strap width: 11 16 mm (0.43 0.63 inch) Strap thickness: 0.4 1.2 mm (0.01 0.04 inch) Pulling force: 900 3200 N adjustable Battery: 4000 mAh rechargeable lithium, approx 90 minute charge, approx 2 hour runtime, about 250 350 straps per full charge, approx 2000 recharge cycles Weight: 6.6 lbs including battery The tool provides a practical, portable solution for repetitive strapping tasks where speed, consistent welds, and reduced manual labor are required.