Product overview This pushbutton switch combines passive infrared sensing and ambient light control to deliver automatic switching for 220V AC lighting circuits. The device uses controllable silicon output for stable switching and supports filament lamp loads specified at 100W to improve conversion rates. Key benefits Automatic operation: PIR sensing plus light control switches lighting based on motion and ambient light, reducing the need for manual intervention. Clear compatibility: Rated for 220V 50Hz mains, designed to work with standard 220V AC installations. Stable switching: Controllable silicon output provides consistent control of the connected load. Specified load support: Suitable for filament lamps up to 100W, with design consideration to improve conversion rates. Simple integration: Pushbutton form factor makes it suitable for replacement or retrofit in existing switch locations. Main functions and attributes Sensing mode: PIR sensing and light control for automatic on when motion is detected in low light conditions, and off when no motion is present. Rated voltage: 220V 50Hz, compatible with standard mains supplies at that rating. Output method: Controllable silicon output for reliable switching of resistive lighting loads. Load power: Filament lamp 100W to improve conversion rates. Form factor: Pushbutton switch format for straightforward installation and user control. Performance notes Designed for reliable detection and switching in typical indoor lighting scenarios. Controllable silicon switching is suitable for resistive filament loads up to the specified power rating. For operation, match wiring and load to the rated voltage and power limits. Typical applications Corridor or hallway lighting that should turn on only when motion is present and ambient light is low. Staircase or landing lights where automatic shortduration activation is preferred over manual switching. Small display or accent lighting using filament lamps where automatic control reduces manual operation. Installation and compatibility Use in circuits rated 220V 50Hz. Intended for filament lamp loads up to 100W. Install according to local electrical codes and ensure load and wiring match the specified ratings. This description reflects the product specifications and intended functions without additional claims or modifications.