Motion sensor switch for LED lights Key benefits Automatic control: Turns lights on only when motion is detected, delivering hands operation and reducing wasted run time. Night only option: Built in day night setting lets the sensor remain inactive in daylight or activate automatically when ambient light is low. Adjustable performance: Sensitivity, detection distance, and delay time are all adjustable so you can match detection behavior to each location. Weather resistant: Designed for outdoor use with IP54 protection for reliable performance in rain and dust exposure. Compact and attractive: Careful craftsmanship and attention to detail provide a neat, unobtrusive appearance. Main features and specifications Function: Passive infrared motion sensor switch for controlling lighting Working voltage: DC 12V Detection distance: Adjustable from 5 to 11 meters Detection angle: 180 degrees Delay time: Adjustable from 5 seconds to 8 minutes Sensitivity: Adjustable to suit installation conditions; normally does not require frequent adjustment Light control mode: Day and night selector. Sun position disables night activation; moon position enables activation only when ambient light is low Load compatibility: Supports LED lighting up to 30 W maximum Protection rating: IP54 for splash and dust resistance Appearance: Carefully finished for a clean, professional look Why customers need this product Eliminates the need to manually switch lights on and off, improving convenience for everyday use. Limits unnecessary lighting to reduce power consumption when combined with low voltage DC 12V LED systems. Adjustable settings allow the same unit to work well in close, medium, or longer range installations and in locations with varying ambient light. Practical applications Porch and entryway lighting: Automatically lights the entrance when someone approaches after dark, and stays off during the day when set to the sun position. Garden and pathway lighting: Use the adjustable detection distance and 180 degree coverage to light walkways only when motion is present. Garage, shed, and outbuilding lights: Reliable IP54 protection and adjustable delay time make it suitable for outdoor structures powered by DC 12V LED systems. What to expect during use Set the detection distance and sensitivity to suit the mounting height and traffic pattern. Use the day night selector to prevent daytime activation or to enable night only switching. Adjust the delay time so lights remain on the desired duration after the last detected motion. This motion sensor switch is designed for straightforward integration with DC 12V LED lighting systems up to 30 W, offering adjustable detection, flexible timing, and weather resistant performance for outdoor lighting control.