24 FT Adjustable Propane Hose and Regulator with Pressure Gauge Overview This 24 foot stainless steel braided propane hose combines an adjustable QCC1 regulator, a pressure gauge, and brass fittings to give precise control, extended reach, and durable connections for grills, burners, fryers, heaters, and similar propane appliances. Key benefits Extended reach: 24 foot hose keeps your tank stationary while placing appliances where you need them. No need to move heavy cylinders for convenience or safety. Precise control: Builtin pressure gauge and adjustable regulator let you monitor and set output pressure for consistent heat and better control of cooking and heating. Durable and secure connections: Stainless steel braided hose and solid brass fittings resist abrasion, animal damage, and corrosion while maintaining airtight, stable connections. Included orifice and fittings: Comes with a brass orifice connector 3/8 Flare MNPT x 1/8 MNPT for broad appliance compatibility. Product features Regulator type: Upgrade QCC1 adjustable propane regulator with adjustable output (030 PSI adjustable output). Pressure gauge: Measures 060 psi and 14 100xKPA to help determine and regulate propane PSI. Hose length and construction: 24 foot stainless steel braided hose for flexibility, weather resistance, and reduced damage from abrasion or animal bites. Fittings: 3/8 female flare fitting on the hose; includes brass orifice connector 3/8 Flare MNPT x 1/8 MNPT. Materials: Stainless steel braid with durable solid brass fittings for secure, airtight connections. Maximum flow capacity: 136000 BTU. Safety feature: Equipped with excess flow protection that will shut off gas flow if tank pressure is too low or appliance demand exceeds the regulator maximum. The regulator will resume operation once conditions to range unless it is defective. Compatibility and use Connector: Black QCC1 connector allows connection between common portable tank setups; for example, it lets you link a 40 pound propane tank to a 100 pound tank configuration without moving the cylinder. Appliance fit: Hose fits appliances with a 3/8 inch male flare connector. Suitable for gas grills, gas stoves, burners, turkey fryers, smokers, fire pits, heaters, and hot water heaters when the appliance uses a 3/8 inch male flare connection. Includes accessory: 3/8 Flare MNPT x 1/8 MNPT brass orifice connector suitable for gas burners. Practical scenarios Outdoor cooking: Connect a propane burner or turkey fryer to a remote tank and use the pressure gauge and adjustable regulator to set consistent heat for frying or heat searing. Backyard heating and entertaining: Run a patio heater or fire pit from a stationary tank up to 24 feet away while monitoring and adjusting pressure for steady performance. Mobile or temporary setups: Use with smokers or portable cookers where precise lowpressure adjustment and a long hose reduce the need to reposition tanks. Installation and operation tips Verify your appliance has a 3/8 inch male flare connection before installation. Use the pressure gauge to set the regulator output to the desired PSI within the 030 PSI adjustable range for the regulator; monitor the gauge to confirm stable pressure. Be aware of the maximum flow capacity (136000 BTU). If appliance demand exceeds that value or tank pressure drops too low, excess flow protection may shut off the gas flow until conditions are corrected. Inspect fittings and hose for damage before each use and ensure all connections are tightened and leak with proper thread sealant or approved sealing method for propane fittings. Important note This regulator includes excess flow protection and will shut off gas flow if the volumetric flow rate required by your equipment exceeds the regulator maximum or if tank pressure is too low. If that occurs, correct the cause before use. If the regulator remains inoperative after conditions are corrected, the regulator may be defective and should be inspected or replaced.