Color: 1 Sensor and 1 Receiver Overview A solar powered driveway alarm system with one motion sensor and one plugin receiver. The sensor uses improved wireless transmission and infrared detection to monitor driveways, gates, and perimeter approaches without frequent battery changes. It is weather resistant for reliable outdoor use. Key benefits Continuous operation and flexible charging: solar charging keeps the sensor powered day to day; when needed the sensor can be fully charged by USB or solar within 8 hours. A fully charged sensor can transmit more than 9000 signals and hold a standby time of over 4 months. Long wireless range and reduced false alarms: FSK plus FHSS wireless technology and advanced infrared sensing provide up to 300 meters wireless range in typical conditions while reducing false triggers from leaves, small animals, light changes, wind, and temperature shifts. Robust weatherproof construction: industrial grade PVC housing and a rubberized weather and water resistant seal stand up to rain, snow, hail, heat, and wind for dependable outdoor performance. Easy setup and low maintenance: devices arrive preprogrammed. Mount the sensor, swivel to adjust detection angle, turn the sensor on, and plug the receiver into a standard outlet. No battery replacement required. Features and specifications Package: 1 sensor and 1 receiver. Detection range: approximately 16 feet to 52 feet in front of the sensor (5 to 16 meters). Wireless range: up to 300 meters in most conditions. Charging: solar charging and USB full charge within 8 hours. Battery performance: more than 9000 transmissions per full charge; standby time over 4 months. Wireless technology: FSK plus FHSS. Housing: industrial grade PVC with rubberized weather and water resistant seal. Preprogrammed for immediate use; swivel mount for angle adjustment. Typical use scenarios Driveway monitoring: detect approaching vehicles or visitors and receive an alert inside the house or garage. Property perimeter awareness: place at gates or pathways to monitor movement along a property border without wiring. Business entrance alert: install near loading zones or entrance doors to know when cars or people arrive. Installation and operation notes Mount the sensor outdoors on a post, wall, or stake using the included swivel mount and aim along the expected path of travel. Turn on the sensor and plug the receiver into an indoor outlet within range. Devices are prepaired to communicate out of the box. For solar charging, mount the sensor where it receives direct sunlight; USB charging is available when solar exposure is limited. This system delivers lowmaintenance motion detection with long battery life, reliable wireless range, and durable construction for a variety of outdoor monitoring needs.