1. The flight controller supports 4-8S battery power; the flight controller has an onboard 12V BEC to provide stable power to the video transmitter and supports controlling the video transmitter switch via the remote control; 2. Onboard 32MB black box; 3. The ESC supports 2-6S input; it uses an 8-layer high-current PCB, with a continuous current rating of 60A and a peak current of 65A; 4. Onboard anti-spark circuit to prevent power-on voltage spikes from damaging the equipment; 5. The ESC has onboard polymer capacitors, eliminating the need for external capacitors on racing drones. Input Voltage: 4-8S (supports LIHV batteries) Mounting Hole Size: 20*20mm (M4) Main Controller: STM32F722RET6 Gyroscope: ICM42688 Barometer: SPA06-003 Analog OSD: AT7456E (LGA) Black Box Capacity: 32MB Motor Output: 4 motors I2C: Supported BEC: 5V 2.5A, 12V 2A (12V with VTX switch) LED Strip: Supported Buzzer: Supported Video Transmission Protocol: Supports DJI MSP/Smartaudio/IRCTramp/HDZero Number of Serial Ports: 6 UART: 6*UART (UART1, UART2, UART3, UART4, UART5, UART6) Flight Controller Firmware: IFLIGHT_BLITZ_F722 (Betaflight) INAV: IFLIGHT_BLITZ_F722 Video Transmitter Switch Code: resource PINIO 1 C0 set pinio_config = 1,1,1,1 set pinio_box = 40,41,255,255 set box user 1 name = VTX ON OFF aux 0 40 8 900 2100 0 0 save Borg Mini 60 ESC Mounting Hole Size: 20*20mm (Φ4) Main Controller: STM32G071N Driver: FD6288 Input Voltage: 2-6S (supports LIHV batteries) Output Current: 60A, Peak 65A (10 seconds) ESC Firmware: IFLIGHT_BLITZ_G3 32.9 Current Sensor: Yes BEC: None ESC Telemetry: Supported Bidirectional DS : Supported Drive Signal Support: DS 150/300/600, MultiS , OneS drive signals, 32-bit ESC Color: Black Material: PCB Package Contents: 1*F7 Stack Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed erro