USB to RJ45 RS485 serial communication cable with FT232RL chip, 5 m This cable converts a PC USB port to an RJ45 RS485 serial interface for hybrid solar inverters, providing a direct and reliable connection for monitoring, configuration, and data transfer. Key benefits Simplifies setup: connects a PC directly to an inverter RS485 port using a single cable, reducing the need for separate adapters or converters. Reliable conversion: built around the FT232RL USB to serial converter chip for stable and consistent serial communication. Flexible placement: 5 meter length allows comfortable laptop placement during commissioning, troubleshooting, or ongoing monitoring. Saves time: enables configuration, firmware updates, and data logging without complex wiring or additional equipment. Main features Function: USB to RJ45 adapter that performs USB to RS485 serial conversion for communication between a PC and compatible inverters. Connector types: USB plug on one end and RJ45 connector on the inverter end for direct interface with RS485 over RJ45 ports. Chipset: FT232RL based conversion for recognized USB to serial functionality. Length: 5 meters for extended reach during field work or installation. Build: flexible insulated cable jacket suitable for repeated handling during setup and maintenance. Compatibility: designed for hybrid solar inverters that provide RS485 communication over an RJ45 connector and for PCs with USB ports. May require standard USB serial drivers on the PC. Performance and reliability Provides consistent serial data transfer suitable for inverter monitoring and configuration tasks. Direct RJ45 connection avoids intermediate wiring, reducing connection points and potential errors. Typical use scenarios Field commissioning: connect a laptop to an inverter on site to configure settings, verify operation, and perform initial tests with a convenient 5 meter reach. Performance monitoring and data logging: establish a continuous or periodic connection from a PC to an inverter for exporting performance data or running monitoring software. Troubleshooting and diagnostics: use the cable during maintenance to read error logs, change communication parameters, or update firmware directly from a service laptop. Notes Ensure your PC has the appropriate USB serial drivers installed if required by the operating system. Intended for devices using RS485 communication over RJ45; confirm inverter compatibility with RS485 over RJ45 before use.