Compact handheld electric strapping tool that automates tensioning, welding, and cutting of plastic straps for fast, secure bundling. Key benefits Fast and fully automatic operation: insert the strap, press the tension button, then press the welding switch. The tool tightens, melts the joint, and cuts off excess strap automatically for a consistent, secure seal. Saves time and labor: tightening force and automated welding let one operator complete a bundle in under one minute, reducing manual effort on repetitive packing tasks. Easy for any operator: degree of automation means non professionals can achieve professional results. The complete unit with battery weighs 6.6 lbs, making it easy to handle for extended periods. Portable and cordless: rechargeable battery power enables use anywhere without a power cord. Fast recharge and long runtime support continuous field work. Features and performance Automatic melting weld and cut mechanism for PP and PE straps. Compatible strap sizes: 10 to 16 mm wide (0.39 to 0.63 inch) and 0.4 to 1.2 mm thick (0.01 to 0.04 inch). Adjustable tension control: manual knob sets pulling force from 0 to 3200 N so you can match tension to the load and strap type. Battery: 4000 mAh lithium battery, rated for about 2000 recharge cycles. Single full charge in 90 minutes provides about 2 hours of operation and approximately 250 to 350 straps per charge. Weight: machine plus battery approximately 6.6 lbs for comfortable handheld use. Designed for heavy duty packaging with large tightening capacity while remaining compact and portable. Practical applications Timber and lumber yards: bundle lengths of timber and stacked boards quickly for storage or transport. Warehouse palletizing: secure pallet loads of cartons, bundles, or components where a reliable plastic strap joint is required. Construction sites and outdoor jobs: fast, cordless strapping of material bundles such as pipes, rebar, or bundled supplies where mobility and speed matter. What you will get in daily use Consistent strap joints with automatic weld and cut. Reduced time per package and lower physical strain compared to manual methods. Simple adjustments for different strap types and tension requirements, allowing one tool to handle a range of packaging tasks. Technical summary Operation: insert strap, tension button, welding switch for automatic weld and cut Strap compatibility: PP and PE, 10 16 mm wide, 0.4 1.2 mm thick Tension range: 0 to 3200 N (adjustable) Battery: 4000 mAh lithium, about 2000 recharge cycles, 90 minute full charge, approx 2 hours run time, 250 to 350 straps per charge Weight: about 6.6 lbs including battery This handheld electric strapping tool is built for faster, more consistent packing where portability and automation are priorities.