Automatic electric strapping tool for PP and PE straps, designed for fast, secure bundling and easy portable use. Key benefits Fast, fully automatic welding and cutting saves time: insert the strap, press tension, then press welding switch. The tool welds and trims excess strap automatically. Consistent, adjustable tension for secure bundles: set pulling force between 900 and 3200 N to match different loads and strap types. Portable and battery powered for onsite use: rechargeable battery supports long runs without a power cord, enabling work in the field or at multiple locations. Main features Automatic weld and cut: electric melting fuses strap ends and cuts off excess in one cycle for reliable seals. Adjustable tension range: manual knob lets you set pulling force from 900 to 3200 N to suit different pack sizes and tightness requirements. Strap compatibility: works with PP and PE straps 11 to 16 mm wide and 0.4 to 1.2 mm thick (0.01 to 0.04 in). Multifunction display panel: intuitive control panel for quickly setting pulling force and fusing time to improve accuracy and repeatability. Large capacity rechargeable battery: 4000 mAh battery, rechargeable in about 90 minutes. A full charge supports roughly 2 hours of operation or 250 to 350 straps per charge. Battery rated for about 2000 recharge cycles. Handheld, portable design: lightweight and easy to carry for use across warehouses, construction sites, or outdoor locations. Typical applications Timber bundling: secure packs of lumber or timber quickly; a single operator can strap a timber bundle in under one minute. Warehouse palletizing: strap cartons, boxes, and mixed pallets for storage and transport. Construction and building supplies: fast, reliable strapping for pipes, metal rods, insulation, and other bulky materials on site. How it works (simple steps) 1. Insert the strap into the baler. 2. Press the tension button to tighten the strap to the preset force. 3. Press the welding switch; the tool automatically fuses the strap and cuts off the excess. Technical summary Strap type: PP and PE Strap width: 11 to 16 mm Strap thickness: 0.4 to 1.2 mm (0.01 to 0.04 in) Tension range: 900 to 3200 N (adjustable) Battery: 4000 mAh rechargeable lithium, about 90 minutes to full charge, about 2 hours operation or 250 to 350 straps per charge, approximately 2000 recharge cycles Controls: multifunction display for pulling force and fusing time This electric strapping tool provides a practical, portable solution for secure, repeatable strapping tasks where speed and consistent tension are important.