Remote Control Clone for MARANTEC Digital Garage Door Opener Models: D302, D304, D313, D321, D323, D382, D384, and Command 131 — Operating Frequency: 868.3 MHz Compatible Models: - Marantec Digital D382 868 - Marantec Digital D384 868 - Marantec Digital D302 868 - Marantec Digital D304 868 - Marantec Digital D313 868 - Marantec Digital D321 868 - Marantec Digital D323 868 - Marantec Command 131 868 Not compatible with remotes operating at 433.92 MHz. Specifications: - Operating Current: 8 mA - Working Frequency: 868.3 MHz - Modulation Mode: ASK (AM) - Transmission Power: 100 mW - Emission Distance: 50–100 m (tested) - Encoding Type: Self-copy - Operating Temperature: –20 °C to +50 °C Features: - Wall-mountable base for convenient placement - Cloning completed in approximately 5 seconds; ready for immediate use - Fully compatible replacement for MARANTEC 868.3 MHz remote controls - Includes battery with extended battery life - Reliable operating range Programming Instructions: 1. Clear existing code from the duplicator: - Press and hold buttons A and B until the LED flashes three times. - Release button B while continuing to hold button A, then press button B slowly three times until the LED flashes. - Release button A to complete code clearance. 2. Copy code from transmitter: - Place the duplicator as close as possible to the remote. - Press and hold button A on the remote, then press and hold button A on the duplicator until the LED flashes. - Release both buttons to complete copying. Repeat for additional buttons. Includes: - Remote control duplicator - Battery - English user manual