Description: If your central heating or irrigation sprinkler system isn't working correctly, it could be down to the solenoid valve. Repair a faulty valve with this 24V DC replacement which is suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications. Features: This is a normally close type electric solenoid valve, power on to open it and power off to close it. Connect to DC 24V voltage and the suggested input current is more than 2A to ensure a stable performance. The high quality brass valve body would hold a press up to 1Mpa and liquid temperature from -5℃ to 100℃. Suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications. This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water. Better for intermittent short time work, single continuous power on time is better to be less than 30 minutes. Specifications: Valve Body: Brass Input Voltage: DC24V Input Current: >2A Power: 16W Type: NC(Normally Close) Pressure: 0-1.0Mpa Thread Size: 3/4" BSPP (DN20) Flow Orifice: 20mm Seal Material: NBR Liquid Temperature: -5~100℃ Suitable for: Non-corrosive oil, water, gas, etc Package Includes: 1 x Solenoid Valve