Z6 Dental Bonding Kit for Orthodontic Light Cure Adhesive System Large Set

69.00 CHF
la livraison GRATUITE

Z6 Dental Bonding Kit for Orthodontic Light Cure Adhesive System Large Set

Verkocht door:

69.00 CHF

Économisez 20.00 CHF (22%)

Prix de vente recommandé

89.00 CHF
En stock
la livraison GRATUITE

Politique de retour sur 14 jours

Modes de paiement:

  • Marque: Unbranded

Description

Z6 Dental Bonding Kit for Orthodontic Light Cure Adhesive System Large Set

Features1、Mainly used for bonding various dental orthodontic accessories.2、Easy to use, less waste, independent operation and other advantages.3、Has high clinical bond strength, high efficiency and convneient to use.4、Wonderful new - generation enamel adhesive resin, complete accessory.5、There are 2 different types available, you can choose by your needs.SpecificationCondition: NewItem Type: Orthodontic Dental AdhesiveOptional Type: Large Set, Small SetMaterial: PlasticService Life: 18 MonthsStorage Condition: Keep below 25℃ (do not freeze)Suitable for: All kinds of dental orthodontic attachment adhesionMain Technical Performance Index: Curing time not more than 3000 adhesive shear strength MPa>17.2Usage:1. Tooth preparation: cleaning the enamel surface of the teeth, remove dirt on the tooth surface, rinse the teeth thoroughly with water, isolate the teeth, and blow dry the tooth surface with oil-free and moisture-free air gun.2. Acid-eroded tooth surface: apply the acid-eroded agent on the tooth surface, rinse thoroughly with water after 50-60 seconds, blow dry, and the tooth surface after acid-eroded is chalky. If there is no chalky appearance, the acid etching time is prolonged.3. Primer: brush a thin layer of liquid on the etch surface of the teeth with a bristle brush, and brush a thin layer of liquid on the bonding surface of the brackets with another bristle brush (wet is enough).4. Bonding: apply a small amount of paste with the mixing rod to the adhesive surface of the grooves coated with liquid agent to form a thin layer.Glue the bracket and the tooth surface immediately after applying the paste.Adjust the position of the bracket within 20 seconds, and press slightly for 5-10 seconds to prevent the bracket from sliding.Remove excess liquid and paste after 40-60 seconds.After curing for 5 minutes, orthodontic operation can be performedPackage List3 x Paste 3.5g1 x Etching Agent 2.5ml1 x Liquid Agent 8ml20 x Brush Head1 x Needles3 x Mixing Pen
  • Identifiant Fruugo: 501968488-1029705025
  • EAN: 437503239413

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Avertissements de sécurité: Do not let your children touch this product alone to avoid swallowing or other injuries, Adult supervision recommended.
Ingrédients: 15%
Numéro de pièce du fabricant: I2813A2507
Numéro de modèle: I754226
Numéro de série: I505332
Numéro de lot: AF14071

Livraison

Expédition dans un délai de 3 jours

  • STANDARD: GRATUIT - Livraison entre ven. 14 août 2026–ven. 21 août 2026 - GRATUIT

Expédition de Chine.

Retours

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles.

Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Suzhoujinluyuandianzishangwuyouxiangongsi
  • Suzhoujinluyuandianzishangwuyouxiangongsi
  • Jianyuanlu 1638hao chuntianhuayuan 24zhuang 1302shi
  • Suzhou
  • CN
  • 215000
  • [email protected]
  • 18860285591

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.