EBay50MM FLEXI HOSE JOINER THREADED COUPLING This Flexi Hose Joiner Threaded Coupling has been specifically designed for joining pieces of flexi hose together. Due to this hose joiner having stepped hosetails, it not only allows you to join various sizes of pipe together but can also be used for reducing your flexi hose size. This joiner also allows you to disconnect each hosetail indivisibly without breaking the seal from the flexi hose. Simply undo the retaining nut and the hose tail will just pull out freely. This is a great feature and will save time and money. The flexi hose joiner will be supplied with 1 “O” ring, offering a superb watertight seal. This hosetail will accommodate flexi hose with and internal diameter (ID) of 30mm, 40mm and 50mm. Joining Spigot: Male 50mm Solvent Weld. For further information on sizing please view the Dimension Charts Supplied. Stepped hosetails have numerous  uses when it comes to converting flexible hose to rigid pipe or other equipment and are simple to use. When connecting any form of flexible hose to a hosetail, please bear in mind that the internal diameter (ID) of the flexible hose will have to match one of the steps on the hosetail. We sell a wide range of hosetails that will connect to most hoses on the market, so please ensure you are using the correct size. Please refer to our Stepped Hosetail Dimensions Chart for further details/sizes. Solvent Weld Solvent weld hosetails can be used in conjunction with fittings, rigid pipe and equipment, providing the correct size is used. Our solvent weld hosetails can be joined using the outside diameter (OD) of the joining spigot and the internal diameter (ID). Please refer to our Stepped Hosetail Dimensions Chart for further details/sizes.  Always use a non-toxic adhesive. Always cut your Hosetail to the correct size and de-burr the cut for maximum flow. Supplied:  2 x 50mm Retaining Nuts 1 x “O” Ring 2 x 50mm Solvent Weld 3 Stepped Hosetail 1 x Threaded Body