MT6701 is a magnetic angle encoder chip based on differential Hall sensing principle. MT6701 senses the magnetic field component perpendicular to the surface of the chip as the radial magnets magnetized by one pair of poles on the chip surface rotate. MT6701 outputs angle signals ranging from 0 to 360°. In addition to providing ABZ/UVW incremental output and Analog/PWM absolute angle output, MT6701 also provides 14-bit digital angle output through the I2C/SSI interface. In addition to measuring the rotation angle, MT6701 also provides a press output to achieve single chip button (rotation+press) function. Product Features: - Based on differential Hall technology, providing absolute angle measurement from 0° to 360° - Working voltage 3.3-5.0V - Working temperature -40°C to 125°C - Linear deviation typical value: Less than ±1° - Within the full temperature range: Less than ±1.5° - System delay is as low as 5us or less - Supports speeds up to 55000 rpm - Provides I2C/SSI interface to read 14-bit angle data inside the chip - Incremental output ABZ supports any resolution from 1 to 1024 lines - Incremental output UVW supports any polarity from 1 to 16 - Provides 12-bit PWM output or analog output (12-bit DAC) - Dedicated press detection output (change in distance between induction magnet and chip), supporting single chip button application - Built-in EEPROM, Greater than 1000 repetitions of programming Specifications: - Color: Black - Material: PCB - Package Contents: 1 x Magnetic Encoder, 1 x Magnet, 1 x Pin (Random Colors) - Note: The package includes only the items listed above. Other products are not included. Disclaimer: - Lighting effects and different display settings may cause the color of the item in the picture to differ slightly from the actual product. - The measurement allowed error is +/- 1-3cm.