Four Modes Optional Motion sensor and manual modes: the "ON or OFF" button on the top and 24 hour and night modes: the "Sun or Moon" switch on the side. When you press the button on the top, if the red light is on, the switch will work all the time if the red light goes out, it goes into motion sensor mode. For "Sun" mode, it will work for 24 hours For "Moon" mode, it will only work at night.Dual Power and Timing AdjustmentThis LED cabinet light can be powered directly by USB cable (not included) or 4 AAA batteries (not included), more convenient. And there is a Time-Delay button, you can adjust the ignition time from 15 seconds to 5 minutes delayed. Note: Can only be powered by 5V USB charger. If you frequently use the cabinet light strip, we recommend that you use the USB port to power it.Flexible and Cuttable Application The 300cm (10ft) LED under cabinet light strip with adhesive allows you to quickly mount anywhere you need more light. This is double-sided adhesive, when peeling off the paper, please be careful. It can also be cut to the length you need, just use scissors to cut on the small black line where the copper connectors are.More energy saving The LED power of this cabinet night light strip only consumes up to 2.4W, but it produces the same light as an incandescent bulb up to 10W. Only turns on when it detects your movement, turns off automatically. Introduction: Automatic on and off. Micro-USB port. Easy installation, no tools required. Energy saving, consumes up to 2.4W. Stay safe at night. Before installation, please make sure the destination surface is clean and dry. Contents: 1 recessed light strip under cupboard.