GL8 28T 2017 to 2024 models: anti-theft alarm, lane change assist system, microwave parking sensor, white rearview mirror

Specifications: High Concern Chemical Substance: None; Communication Range: 15 meters; Model Name: BSD Type: Visible; Name: CARBAOHUI; Origin: Mainland China; Material: ABS; Certification: CE; Operating Current: 200mA; Power Supply Voltage: 12V; Model: BSD Type: Visible; Compatible Models: GL8 28T 2017-2024; Product Description: 1. This system is a vehicle assistance device that helps drivers change lanes safely while driving. 2. It uses 24GHz microwave sensors to detect moving objects in the blind spots on the sides/rear of the vehicle. 3. The system consists of a control box (computer controlled), two microwave sensors, two blind spot monitors (or LED lights), a buzzer, and wiring harnesses for connecting the microwave sensors and the computer. 4. Blind spots exist behind the vehicle, which can easily endanger driving safety! After installing a Blind Spot Monitoring (BSM) system in your car, regardless of day, night, or snow, the system will issue an alarm if a moving object enters behind the vehicle. LED lights will flash and a buzzer will sound, reminding the driver to be cautious when changing lanes and avoid side collisions. 5. After the vehicle stops, the system will delay for 30 seconds. When there are bicycles, electric bikes, motorcycles, pedestrians, or other vehicles nearby, the system will illuminate, reminding the driver of the risk of opening the door. Please ensure safety before opening the door. Why install a Blind Spot Monitoring Assist System? 1. Lane changing and merging: Blind spots during lane changes easily lead to collisions. 2. Reversing hazard: Other vehicles suddenly appearing can easily cause collisions. 3. Blind spot elimination: Unable to see what's behind the vehicle. 4. Obstructed vision: In inclement weather. Lane turning assist, safe driving, lighter load. Blind spot detection. Can detect lanes up to 4 meters wide, with a rear vehicle detection distance of 30 meters and a warning distance of 15 meters. While driving, if a moving vehicle appears in the blind spot, the system will automatically assess the danger and issue a warning. Blind spot monitoring. Parallel. Radar detects vehicles traveling in the side lane. Once a vehicle that is difficult to identify in the side or rear blind spot is detected, the LED indicator on the rearview mirror will alert the driver. Blind spot detection warning: While driving, if there is a vehicle in the blind spot of the rearview mirror, the yellow light will flash to warn you that a vehicle is approaching from the side. At this time, if you want to overtake or change lanes and use the left turn signal, the yellow light will turn red. Flashing red light and a buzzer sound! PCTA Parking warning. When our vehicle is about to reverse out of the garage and the system detects a moving object approaching, the yellow light on the rearview mirror will flash. LCA Lane change assist warning. When driving at high speed, if a vehicle in the adjacent lane approaches rapidly from 15 meters away, the yellow light on the rearview mirror will illuminate to warn you that a vehicle is approaching rapidly! AOA Active overtaking assist. Warning: Unlike warnings for vehicles approaching from behind, the rearview mirror will not issue a warning when the vehicle is preparing to overtake a vehicle in front without changing lanes. The yellow light will turn red when your vehicle needs to change lanes and you signal left. The red light will flash and a buzzer will sound! Blue lens anti-glare. The blue lens provides clearer visibility and improves driving safety. Compatible with various environmental scenarios. Unaffected by environmental conditions. Unaffected by wind or rain. Installation Instructions: Hidden radar sensor. Utilizes 24GHz millimeter-wave radar technology for real-time detection of both rear and side views. Replaces the original rearview glass. Retains the electric heating function. Product Display: Installation Instructions: Wiring: Yellow wire connects to the common battery (B+). Red wire connects to ACC +. Black wire connects to ground. Turn signal wire connects to the positive terminal of the corresponding light. Other extension wires connect directly according to the markings. Installation Requirements: The sensor's signal transmission surface can only penetrate the plastic bumper housing, not metal. The sensor may be affected by fluorescent lights. The sensor should be securely fixed using a bracket or 3M adhesive and should not wobble. The sensor terminals should be vertically downwards and tilted outwards at a 25° angle. Regarding packaging: The actual packaging of the product may differ from the picture, but please rest assured that the product is the same.