BP1: 2x fully threaded plastic rods. 4 nuts included. Material: PP / Polypropylene. White colour. Size: M8 x 500 mm. Diameter: 8 mm. Pitch: 1.25 mm. SKU: 990.. BP2: Polypropylene is lightweight and absorbs very little moisture, useful for simple non-metallic spacer layouts.. BP3: Material caution — PP is less stiff than nylon or reinforced nylon, so check thread fit and tightening method.. BP4: The fully threaded 500 mm length accepts compatible M8 nuts along the rod and can be cut carefully to shorter sections.. BP5: Use for light-duty spacing, alignment and positioning where a lightweight PP M8 threaded rod is preferred.. || PRODUCT DESCRIPTION SUMMARY: These M8 x 500 mm white PP threaded rods are supplied as 2 fully threaded polypropylene plastic rods. Polypropylene is lightweight, absorbs very little moisture and provides useful electrical insulation, with resistance to many acids and alkalis where the material is suitable. This size suits lightweight spacers, panel separation and cut-to-length non-metallic threaded sections, especially where a simple non-metallic threaded bar is preferred over a metal fixing. The full-thread form accepts compatible M8 nuts along the rod and can be cut carefully if shorter plastic sections are needed. PP is less stiff than nylon or reinforced nylon, so check thread engagement, tightening method and operating environment before use. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M8 x 500mm. Colour_Ref: White. Material_Ref: PP / Polypropylene. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 500 x 8 x 8. || Additional Specifications: Pitch_MM: 1.25. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Stock Code: CR-Rod-07039-PPMaterial: PolypropyleneMaterial Reference: PPHead/Drive Type: Fully Threaded Rodsize: M8 x 500D: 8 mmPitch: 1.25 mmL: 500 mm