Item Type: Orthodontic Dental Adhesive Optional Type: Large Set, Small Set Material: Plastic Service Life: 18 Months Storage Condition: Keep below 25℃, do not freeze Main Technical Performance Index: Curing time not more than 3000s, adhesive shear strength MPa>17.2 Feature: 1. Mainly used for bonding various dental orthodontic accessories 2. Less waste, independent operation 3. New-generation enamel adhesive resin, complete accessory 4. 2 different types available, choose by your needs Compatible with: All kinds of dental orthodontic attachment adhesion Usage: 1. Tooth preparation: Clean the enamel surface of the teeth, remove dirt on the tooth surface, rinse the teeth thoroughly with water, isolate the teeth, and blow dry the tooth surface with oil-free and moisture-free air gun 2. Acid-eroded tooth surface: Apply the acid-eroded agent on the tooth surface, rinse thoroughly with water after 50-60 seconds, blow dry. The tooth surface after acid-eroded is chalky. If there is no chalky appearance, prolong the acid etching time 3. Primer: Brush a thin layer of liquid on the etch surface of the teeth with a bristle brush, and brush a thin layer of liquid on the bonding surface of the brackets with another bristle brush, wet is enough 4. Bonding: Apply a small amount of paste with the mixing rod to the adhesive surface of the grooves coated with liquid agent to form a thin layer. Glue the bracket and the tooth surface immediately after applying the paste. Adjust the position of the bracket within 20 seconds, and press slightly for 5-10 seconds to prevent the bracket from sliding. Remove excess liquid and paste after 40-60 seconds. After curing for 5 minutes, orthodontic operation can be performed Package List: 1 x Paste 3.5g 1 x Etching Agent 2.5ml 1 x Liquid Agent 8ml 7 x Brush Head 1 x Needles 1 x Mixing Pen