Ceiling Fan Balancing Kit with Adhesive Weights and Clips for Wobbling Fix, A89Z Set

Ceiling Fan Blade Balancing Kit for Reduced Wobble and Noise Key benefits - Eliminates or reduces fan wobble to improve stability and reduce noise. - Extends service life of fan blades and related components by preventing uneven wear. - Fast, tool-free balancing with reusable balance clips and secure self-adhesive metal weights. - Compatible with most ceiling fans and easy for DIY installation. What is included - Total contents: 6 balance clips, 6 self-adhesive metal 5 g weights, 9 self-adhesive metal 3 g weights. - Delivered as 3 sets for 5 g balancing (each set: 1 clip and 2 5 g weights) and 3 sets for 3 g balancing (each set: 1 clip and 3 3 g weights). - Colors available: black, gold, silver. - Materials: durable plastic clips and metal adhesive weights. - Only the items listed above are included. How it works - Use the plastic balance clip to locate the blade causing the most vibration. - Apply the small self-adhesive metal weights along the blade centerline at the spot where the clip showed the biggest improvement. - The adhesive weights hold firmly so they will not easily fall off. - According to basic balance principles, thin or lighter areas of the rotating blade cause less resistance and help the adhesive weight to sit evenly, improving balance. Simple step-by-step use 1. Turn on the fan and set it to the speed where wobble is most noticeable. 2. Turn the fan off and wait until it stops completely. Clip a balance clip on the back edge of one blade, halfway between the blade holder and the tip. 3. Turn the fan on briefly and observe whether wobble increases or decreases. Turn the fan off and move the clip to another blade, testing each blade. Note which blade shows the greatest improvement. 4. Place the clip on that blade and move it inward and outward to find the position with best improvement. 5. Remove the clip and attach a self-adhesive weight along the blade centerline near the position where the clip was placed. 6. If wobble remains, use additional weights and the clip to fine tune the balance. Suitable applications - Correction of wobble after replacing or cleaning ceiling fan blades. - Reducing noise in living rooms, bedrooms, offices, and restaurants where fan vibration is noticeable. - Balancing older fans with slightly warped blades to extend usable life before blade replacement. Compatibility and performance - Designed for compatibility with the majority of household ceiling fans. - Small 3 g and 5 g weights allow precise adjustment to correct minor imbalances without changing blade geometry. - Plastic clips are reusable for repeated balancing or for use on multiple fans. Notes - Slight color variations may occur due to lighting and display differences. - Allowable measurement tolerance is plus or minus 1 to 3 cm. This kit provides a practical, low-effort solution for stabilizing ceiling fans and reducing vibration related noise.