Suitable for automatic voltage regulator AVR SR7-2G for MECC ALTE generator

Suitable for automatic voltage regulator AVR SR7-2G for MECC ALTE generator The type 1.-7 voltage regulator is an electronic 5-amp regulator with an advanced design that ensures excellent alternator performance during operation and starting. The regulator is equipped with a complete protection system against operating conditions that could be dangerous for the machine. The SR7 regulator is suitable for use with all M.A. alternators and is the standard supply for outputs below 85 kVA, both three-phase and single-phase. 4.-7 AVRs are in stock for fast delivery. 5.-7 AVR/Automatic Voltage Regulator AVR SR7, AVR SR7-2G for Generator Sensor Input Connection 1, 2, 3, 4, 5, 6 Can be connected to Y or 220~480VAC single-phase 50/60Hz Current Input 50~280VAC (1, 2) 50/60Hz Output Voltage Maximum 90VDC at 220VAC Harmonic Wave Output Current Continuous 6A Maximum 8A for 10 sec. Overexcitation Protection 25~55VDC for 0.1~20 sec. Underfrequency Protection Frequency Range 42~60Hz Voltage Regulation Less than 1% (with 6% motor regulation) External Voltage Adjustment 5% @ 100K Voltage Build-up Residual Voltage above 5 VAC 25Hz EMC Suppression Internal Filtering of Electromagnetic Interference Excitation Winding Resistance DC Resistance 10~100 The -7 voltage regulator is an advanced electronic 5-amp regulator that ensures excellent alternator performance during operation and starting. The regulator is equipped with a complete protection system against operating conditions that could be dangerous for the machine. The -7 regulator is suitable for all M.A. alternators and is part of the standard supply for outputs below 85 kVA, both three-phase and single-phase. Material: Plastic + Metal Color: Black Package Contents: 1 x English Manual 1 x Voltage Regulator Board Only the above package contents, other products are not included. Note: Light and different displays may cause the color of the item in the picture to be slightly different from the real thing. The allowable measurement error is +/- 1-3cm.