2Pack L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper compatible withAr-Duino Electric Projects Smart Car Robot

20.95 CHF
la livraison GRATUITE

2Pack L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper compatible withAr-Duino Electric Projects Smart Car Robot

Verkocht door:

20.95 CHF

Économisez 38.05 CHF (64%)

Prix de vente recommandé

59.00 CHF
En stock
la livraison GRATUITE

Politique de retour sur 14 jours

Modes de paiement:

  • Marque: Unbranded

Description

2Pack L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper compatible withAr-Duino Electric Projects Smart Car Robot

Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability. High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. Large capacity filter capacitance,afterflow protection diode, more stable and reliable. Specification: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Maximum power: 25W Drive voltage: 5V-35V Drive current: 2A( compatible witheach DC motor) Operating mode: Dual H-bridge driver (can drive 2 DC motors) Reason 1: Use L298N compatible withMain Chip L298N is a kind of high voltage, high current motor driver chip. Features as high working voltage (maximum voltage up to 46V), large output current (instantaneous peak current up to 3A), continuous working current 2A and 25W of rated power. Having 15 pins as package. Two built-in H Birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor, relay coil and so on. The chip can connects to external detecting resistor to give the variations to the control circuit. Using L298N Chip to drive the motor, the chip can drive a stepping motor or four phase stepping motor, and two DC motors as well. Using standard logic level signal control, it has two enable control ends. It permits or prohibites device having a logic power supply input without the impact of input signal, which enables the internal logic circuit part works at low voltage. Reason 2: Wide Application size: 43 x 43 x 27mm Material: PCB colour: red Package Contents: 2 x L298N Motor Drive Controller Board Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the c
  • Identifiant Fruugo: 515100442-1050865307
  • EAN: 3239040713831

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Étiquettes de sécurité des produits

CE Mark
Numéro de pièce du fabricant: I500306823
Numéro de série: I500306823

Livraison

Expédition dans un délai de 3 jours

  • STANDARD: GRATUIT - Livraison entre jeu. 27 août 2026–jeu. 03 septembre 2026 - GRATUIT

Expédition de Chine.

Retours

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles.

Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • 91440500767340019K
  • Guangdong Guangwei Knitting Co., Ltd.
  • Chuangda Road, Huaguang Industrial Zone, Gurao Town, Chaoyang District, Shantou City
  • Shantou
  • CN
  • 515159
  • [email protected]
  • 13422264227

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • 819 698 275 00032
  • DISCOUNT INDUSTRY
  • 10 Rue Des Grands Pres, 60230 Chambly, Oise, France
  • OISE
  • FR
  • 60230
  • [email protected]
  • 0033 748562127