5m LED Strip Extension Cable 2 Pin 22AWG Connector Cord, Flexible PVC Insulated Wire for Lights

5 meter single color LED strip extension cable designed to extend and link standard single color LED strips while keeping a neat, reliable connection. Key benefits Extends reach between LED strips and the power source so you can place strips farther from the driver without cutting or relocating components. Preserves correct polarity and stable performance with 22 AWG copper conductors for low voltage single color strips. Simple, flexible solution for joining segments or routing wiring through cabinets, behind panels, or around corners. Main features Length: 5 m for long runs and flexible placement. Maximum current: 2 A. Do not exceed this rating. Conductor: internal copper wire for reliable conductivity. Insulation: PVC plastic shell for flexibility and basic protection. Wire gauge and connector: 2 pin 22 AWG connection cable. Requires soldering to LED strip pads or connectors. Colors: red and black for clear positive and negative identification. Compatibility: made for single color standard LED strip types 3528, 5050, 5630. Practical use scenarios Undercabinet lighting: extend the strip run to reach a power supply located in a nearby cabinet without interrupting the strip layout. Retail signage and display cases: join multiple single color strip segments around a display or corner where factory connectors do not reach. DIY furniture and shelving: route the power connection through a piece of furniture or wall space while maintaining a neat external appearance. Installation and handling tips Solder connections to the LED strip pads or to compatible connectors. Ensure secure, clean solder joints. Observe correct polarity: red to positive, black to negative. Insulate solder joints with heat shrink tubing or electrical tape before final installation. Keep total current draw below 2 A to avoid overheating or voltage drop. Avoid sharp bends and excessive pulling on the cable to maintain conductor integrity. This extension cable provides a straightforward, compatible way to extend and link single color LED strips using common 3528, 5050, and 5630 formats while offering clear wiring identification and a long 5 m reach.