2Pcs 0.7mm Back Probe Test Pins for Multimeter, Insulation‑Piercing Banana Plug Probes Set

16.95 CHF
+ 2.99 CHF Livraison

2Pcs 0.7mm Back Probe Test Pins for Multimeter, Insulation‑Piercing Banana Plug Probes Set

Verkocht door:

16.95 CHF

Économisez 8.00 CHF (32%)

Prix de vente recommandé

24.95 CHF
En stock
+ 2.99 CHF Livraison

Politique de retour sur 14 jours

Modes de paiement:

  • Marque: Unbranded

Description

2Pcs 0.7mm Back Probe Test Pins for Multimeter, Insulation‑Piercing Banana Plug Probes Set

2piece backprobe test pins for multimeters and test leads. Each probe features a 0.7 mm wirepiercing needle and a banana socket plug connection. These destructive piercing probes are designed to make direct electrical contact through insulation when stripping is impractical. Key benefits Make reliable contact without stripping insulation: the 0.7 mm piercing needle accesses conductors through the jacket for quick measurements. Compatible with standard bananasocket multimeter leads: plugs into most test leads and banana jacks for easy integration into existing test setups. Quick and repeatable connections: ideal for troubleshooting or spot checks where access is limited. Supplied as a pair: two probes allow simultaneous differential measurements or a spare on hand. What this product does Function: backprobe multimeter test pins that pierce insulation to reach the conductor and transfer the signal to a bananasocket connection. Intended use: temporary, diagnostic contacts. These are destructive piercing probes, so use when permanent insulation integrity is not required. Specifications Quantity: 2 pieces Needle diameter: 0.7 mm Connection: banana socket plug Type: wirepiercing, destructive backprobe Practical applications Automotive wiring diagnostics: check voltage, continuity, and signal presence on harness wires without cutting or fully stripping insulation. Electronics and prototyping: access small signal wires or harnesses when probe tips cannot reach exposed conductors. Field maintenance and troubleshooting: perform quick checks on power and control cables where access is limited or removal of insulation is not feasible. Usage notes These are piercing probes that intentionally breach insulation. Use with care to avoid unintended short circuits or further wire damage. Not intended as a permanent connection. Remove after testing and or reinsulate the wire as required. Pack contents Two backprobe multimeter test pins, 0.7 mm wirepiercing needles with banana socket plug connections.
  • Identifiant Fruugo: 519985401-1058608069
  • EAN: 6291595685466

Livraison

Expédition dans un délai de 7 jours

  • STANDARD: 2.99 CHF - Livraison entre lun. 31 août 2026–mar. 08 septembre 2026

Expédition de Chine.

Retours

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles.

Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Shenzhen Hengdan Electronic Commerce Co., Ltd.
  • Shenzhen Hengdan Electronic Commerce Co., Ltd.
  • Tairan 4th Road No.113,Tairan Technology Park,Building 213,4th Floor,4B32R
  • Futian District,Shatou Subdistrict,Tianan Community
  • Shenzhen
  • CN
  • 518000
  • [email protected]
  • 8617363858868

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • Sea&Mew Consulting GmbH
  • Sea&Mew Consulting GmbH
  • Mittenhuber Strasse 4
  • Neumarkt
  • DE
  • 92318
  • [email protected]
  • 4915224685061