6mm Slip Ring 8 Channel 1.5A Low Friction Bearing for Robotics, Compact Design Stable Signal Transfer

Compact NeedleBearing Slip Ring, Dia 6 mm — 4CH or 8CH, 1.5A Product highlights Two available models: Diameter 6 mm, 4CH, 1.5A, length 11.8 mm Diameter 6 mm, 8CH, 1.5A, length 11.8 mm Needlebearing design to improve conversion rates and reduce mechanical friction Rated voltage 0 to 240 VAC or VDC and rated current 1.5 A per channel Maximum recommended rotation speed 300 RPM Contact material: precious metal for stable lowresistance connections Wire specification AWG28 with standard cable length 250 mm Protection level IP51 Dielectric strength 500 VAC at 50 Hz for 60 seconds Insulation resistance 500 MOhm at 500 VDC Operating temperature range 20 to 80 degrees C Why choose this product Reliable electrical transfer through rotating joints: precious metal contacts and insulation resistance deliver stable signals and power at voltages up to 240 VAC or VDC. Low friction and extended mechanical life: needlebearing construction reduces wear and helps maintain consistent performance at speeds up to 300 RPM. Compact and easy to integrate: 6 mm diameter and 11.8 mm length make these units suitable for tight assemblies where space is limited. Simple wiring and installation: standard AWG28 leads with 250 mm cable length provide immediate compatibility with common wiring practices. Key functions and compatibility Transmit power and signals across a rotating interface for electromechanical devices. Available in 4 channel and 8 channel configurations to match application channel counts. Rated for general industrial and instrumentation voltages from 0 to 240 VAC or VDC. Practical applications Robotic joints and rotary actuators where compact size and stable signal transfer are required. Rotary sensors and encoders that need lownoise electrical contacts and reliable insulation. Packaging and assembly machines with rotating heads that require multiple signal or power channels. What to expect Consistent electrical performance with low contact resistance and insulation. Durable mechanical operation under the specified temperature and speed limits. Straightforward replacement or integration into existing systems requiring a compact slip ring solution. Specifications summary Diameter: 6 mm Length: 11.8 mm Channels: 4CH or 8CH Rated current: 1.5 A Rated voltage: 0 to 240 VAC or VDC Rotation speed: up to 300 RPM Contact material: precious metal Wire: AWG28, cable length 250 mm Protection: IP51 Dielectric strength: 500 VAC at 50 Hz, 60 seconds Insulation resistance: 500 MOhm at 500 VDC Working temperature: 20 to 80 degrees C If your application requires a compact, lowfriction rotating electrical interface with 4 or 8 channels and a 1.5 A rating per channel, these 6 mm needlebearing slip rings offer a practical, reliable option.