15Pairs PH 2.0mm 4 Pin Connector Cable Set with 26AWG Wire 30cm for Reliable Power Transfer

This 4pin, 2.0 mm pitch malefemale cable set provides a simple, reliable way to connect lowvoltage electronic components. Each lead uses tinned copper conductors and plastic housings, with a 300 mm male cable and a 300 mm female cable. Rated for 25 V and 2 A, the cables are designed for common electronic and hobby applications that require compact, secure connections. Key benefits Reliable electrical contact: Tinned copper conductors maintain good conductivity and resist corrosion for consistent signal and power transfer. Correct form factor: 2.0 mm pitch and 4pin configuration match many small connectors used on PCBs, control panels, and modules. Readytouse lengths: 300 mm male and 300 mm female cables reduce the need for additional soldering or extensions. Durable construction: Plastic housings on each end provide stable connector alignment and mechanical protection for the terminals. Appropriate ratings: 25 V and 2 A support typical lowvoltage circuits for sensors, LEDs, small motors, and audio components. Specifications Number of pins: 4 Pitch: 2.0 mm / 0.078 inch Conductor material: Tinned copper wire Housing: Plastic head at each end Length: 300 mm / 11.8 inch male cable plus 300 mm / 11.8 inch female cable Voltage rating: 25 V Current rating: 2 A Performance: Good conductivity, temperature resistant, durable Practical use scenarios Prototype wiring: Connect sensors and modules to a microcontroller or control board with matching 2.0 mm pitch connectors for quick testing and swaps. LED and lighting projects: Link LED drivers or small lighting modules to power supplies and controllers where space is limited and a 4pin connector is required. Audio and small appliance connections: Use the cable pair to connect speakers, battery packs, or control panels where a compact 4pin connection is standard. Compatibility and fit These cables are suitable for electrical appliances, automotive hobby projects, robots, lighting setups, toys, PCB control panels, speakers, audio equipment, batteries, and household devices that use a 4pin, 2.0 mm pitch connector and require up to 25 V and 2 A.