DN08/10/15/20/25/32/40/50 AC 110V AC 220V DC 12V DC 24V Plastic Normally Closed Solenoid Valve Water Valve Switching Valve

DN08/10/15/20/25/32/40/50 AC 110V AC 220V DC 12V DC 24V Plastic Normally Closed Solenoid Valve, Water Valve, Switching Valve DN08/10/15/20/25/32/40/50 AC 110V AC 220V DC 12V DC 24V Plastic Normally Closed Solenoid Valve, Water Valve, Switching Valve Dear Buyer: Welcome to our store. This solenoid valve has two options. Please understand the options before purchasing and choose the one that suits you best. Standard Coil Suitable for single-time energization time of less than 1 hour. If the energization time exceeds 1 hour, the coil will generate heat and is easily damaged. Non-Heating Coil Non-heating coil: Applicable after energization. If the coil is energized for more than one hour, it will not overheat; it is energy-efficient, consuming only one-fifth the power of a regular solenoid valve; and it produces almost no magnetic leakage noise. With an external energy-saving module, it can be continuously operated for 24 hours without burning out. If the energizing time is less than one hour, a low-cost solenoid valve is recommended. Please choose the appropriate product based on your application. In the short term, immediate use is economical; in the long term, a higher-quality coil is preferable. Working principle: The valve opens when energized and closes when de-energized. Installation Steps: 1. Fit the threaded connector onto the strap. 2. Connect the solenoid valve according to its orientation. 3. Connect to the standard power supply. 4. Check the seals and circuit. Installation Precautions: 1. Keep the pipes clean before installation. 2. When installing the solenoid valve, ensure the pipe thread is properly fitted and adjust the position of the solenoid device. 3. Ensure proper insulation of the circuit. 4. Install the solenoid device according to the current direction.