Car Backup Camera Rearview Adapter Decoder for RNS315 Auto Tools Accessoies CVBS to RGBS Converter Multicolor

["brand new and high quality\nFeatures:\nMade of high quality material, solid, durable and good performances.\nIt increase the grounded power supply for protections of the camera to better protect the camera from working properly.\nAdopts high-capacity, high-voltage filter capacitors for better filtering.\nImproved for DCpower plug is tighter to reduce the probability of contact failure.\n2m long power cable, suitable for most models, no extension cable required.\nThe delay circuit up to 50seconds, which can fully meet the needs of the crowded parking lot. And there is no need to star or stop the camera repeatedly, extend the life of the camera.\nSuitable for RNS315.\nCompatibility: The RGB camera camera with RGB decoders can achieve reversing rear view function.\n\nInstallation:\nStep 1. Disconnect the plug of car radio.\nStep 2. Plug the car radio power cord.\nStep 3. Plug the cable into the reversing socket.\nStep 4. Take the 6m cable to the car rear.\nStep 5. Take 12 V power supply from the reversing taillight to the camera.\nStep 6. Make sure the insulation of the cable.\nStep 7. Hide the cable along the car door.\nStep 8. Connect the camera power cable to the cable.\nStep 9. Make the car in reverse, and the signal will automatically switch.\n\nSpecifications:\nItem Name: RGB Adapter\nMaterial: ABS Plastic\nVoltage: 12V\nPower: 2W\nSize: app.7.7x5.2x3cm/3.03x2.05x1.18in\nColor: for Gray\nQuantity: 1 Set\n\nNote:\nTransition: 1cm=10mm=0.39inch\nPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.\nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage includes:\n1 x RGB Box\n1 x Regulated Power Supply Box\n1 x Power Cable\n1 x Cable"]