12 Pieces M2 Double Clamp Brake Cable Clamp, Stainless Steel for 1mm Steel Wire Rope

The double wire rope clamp is made of 304 stainless steel, so it is not easy to oxidize. 304 stainless steel features resistance to rust, corrosion and crystal corrosion, wear resistance, gloss surface. It works well in interior and exterior wet areas, with two-post hardware, heavy rigging, necessary hardware for cables and wires.The double-sided clips can be used to fix clotheslines, shade sails, awnings, banners and cables, and are also widely used in industry, construction, transport, ships and anchors. The wire rope installation clip supports install, disassemble and reuse.The double strand wire rope clip is composed of bolt seat, nut and a washer. It has locking ability and stability. The duplex collar is characterized by a simple and practical design and ease of use. If you use it, please turn it with a spanner. Double the nut on the chuck, then wind the cable on each side of the screw and tighten the nut with a suitable spanner.There will be no fixed rotation tightening phenomenon. The two-post bolts make it tighter and more stable, and the rear two bolts make it tighter and more stable, which eliminates potential safety hazards during use, and the precision of the thread is will not slip when tightening. The two-post cable tie is used to form a loop on the wire rope.It is recommended to choose a clamp one size larger than the tension rope, for example, 1mm rope is compatible with M2.Stainless Steel Cable Clamp Cable Tie Clamp brake, used for heavy rigging, cables and wires, and has a high load capacity.SPECIFICATION:Material: 304 stainless steelSize: M2Color: SilverINCLUDING:12*Double Wire Rope ClampSPECIFICATIONS:The double wire rope clamp is made of 304 stainless steel, so it is not easy to oxidize. 304 stainless steel has rust resistance, corrosion resistance and strength crystal corrosion, wear resistance, glossy surface, and anti-breakage.The double-sided clips can be used to fix clotheslines, shade sails, awnings, banners and cables. The wire rope installation clips support install, disassemble and reuse.The double strand cable tie is composed of a bolt seat, a nut and a washer. It has locking ability and stability. The duplex clamp is characterized by simple and practical design and ease of use.The phenomenon of fixed rotation and tightening will not occur, the two-post bolts make it tighter and more stable, and the two rear bolts make it tighter and more stable, eliminating potential safety hazards during use.It is recommended to choose a clamp one size larger than the rope of tension, for example, 1 mm rope is compatible with M2.