Self Curing Bonding Orthodontic Dental Composite Resin Kit

Features1 Used for bonding various kinds of dental orthodontic accessories2 Independent operation, for orthodontic treatment, less waste3 Includes 7pcs brush head and 1pc needle4 Enamel adhesive resin, compatible with hospital and dentist use5 Curing time no more than 3000s, bond shear strength MPa >17.2SpecificationItem Type: Light-Cure Orthodontic AdhesiveMaterial: ResinStorage Conditions: Store below 23℃, do not freezeCompatible with: Bonding various kinds of dental orthodontic accessoriesCuring time no more than 3000s, bond shear strength MPa>17.2Usage1. Preparation of teeth: clean the enamel surface of the teeth, remove the dirt on the tooth surface, rinse thoroughly with water, isolate the teeth, and blow dry the tooth surface with oil-free and moisture-free air gun.2. Acid etch tooth surface: apply acid etch on the tooth surface, rinse thoroughly with water after 50-60 seconds, blow dry, and the tooth surface after acid etch is chalky. If no chalky appearance, prolong the acid etch time.3. Primer: brush a thin layer of liquid agent on the tooth etching surface with a small brush, and brush a thin layer of liquid agent on the bonding surface of the bracket with another small brush, just wet.4. Bonding: apply a small amount of paste to the adhesive surface of the supporting grooves of the liquid agent with the mixing stick, and form a thin layer. After applying the paste, glue the brackets to the tooth surface immediately. Position the support grooves within 20 seconds and press slightly for 5-10 seconds to prevent the support grooves from sliding. Remove excess liquid and paste after 40-60 seconds. After curing for 5 minutes, orthodontic operation can be performed.Package List1 x 3.5g Paste1 x 2.5ml Acid Etch1 x 3ml Liquid7 x Brush Head1 x Needle Tip1 x Mixing Pen