Wireless Remote Control Electrical Outlet Switch Remote Lighting Switch Outlet for Home Appliances

Product Features: The interface of this wireless remote control outlet is user-friendly and convenient, suitable for remote control of power supplies, energy conservation, and environmental protection.Manual and Remote Control Two Modes: The wireless remote control outlet is designed with two operating modes: manual and remote control. The round key on the interface is not only a manual key but also a learning key forcode matching with the remote control.Two Adjustable Operating Modes: In remote control mode, there are two adjustable operating modes (self-locking and locking). Switch between them using the learning button on the interface. It can be combined with various Wireless remote controls.Applicable scenarios: Use the remote control or plug to turn your household appliances on and off. It applies to almost all electronic equipment, including lights, air conditioners, heaters, audio systems, Christmas decorations, and charging equipment.Scope of application: The wireless remote control plug refers to the implementation of contactless remote control of controlled objects. It is widely used in household appliances, lamps, and other devices.SpecificationItem type: Wireless remote control socketMaterial: ABSColor: As shown in the pictures.Weight: Approx. 120g / 4.2 ouncesRemote control battery type: Button cell (comes with built-in battery)Remote control battery model: CR2016Remote control battery capacity: 200 mAh.Number of batteries: 2Plug specification: EU plug 100-240V.How to useOperating method:Self-locking learning code matching method: First, check the wireless remote control socket on the household's common plugboard; Connect an electrical device to the socketUse the remote control to manually test if the outlet is switched on normally; Then press and hold the learning button for approximately 3 seconds; The learning indicator on the remote outlet interface will light up;Release the remote control; Immediately press any button on the remote control twice; The learning indicator will flash three times and then turn off; This indicates successful learning.Code Erasure Method:(If you need to change the operating mode, please erase the code first, then check the code) Press and hold the learning button on the remote outlet interface for approximately15 seconds; The learning indicator light turns on and off to indicate successful code clearing.Interlock learning code matching method: long press the learning key for about 3 seconds; The learning indicator on the remote socket interface is on; release; Press immediately on any button (or unlock button) on the remote control; Press another button (or lock button) on the remote control; The learning light flashes three times then turns off; This means learning successful. List of packages 1 x remote control 1 x Socket 1 x double-sided adhesive ​