Nuclear radiation detector, Geiger counter, X-ray beta and gamma tester, dose alarm with battery

Features:1.MAIN PURPOSE: Portable nuclear radiation detector with high accuracy and sensitivity. The measurement range is 0.08 µSv to 50 mSv. It can be used to monitor X-rays, beta rays, and gamma rays.2.GOOD PERFORMANCE: A powerful microprocessor is selected and equipped with a TFT2.0 color screen, making it easy to use and less prone to interference.3.ALARM METHOD: Arbitrary combination of audible and flashing alarm methods. The alarm threshold can be arbitrarily set; when the threshold is reached, an alarm will be emitted promptly.4. MULTIPLE FUNCTIONS: With real-time monitoring, automatic alarm and fault self-checking function against the standard, synchronization measurement support, arbitrarily set between 00 and 999 hours.5.APPLICABLE SCENES: Widely used in home renovation, nuclear laboratories, petrochemicals, geological surveys, radiation dose monitoring, and personal protection.Specifications:Item Type: Nuclear Radiation DetectorModel: HFS 10Material: ABSBattery: 3.7V 1500mAh Rechargeable Lithium Battery (Built-in)Application: Nuclear Radiation Detection AlarmScope of Application: Home improvement radiation, radiation treatment companies, health and epidemic prevention, radiotherapy, nuclear laboratories, nuclear power plants, import and export product inspection, building materials, petrochemicals, geological surveys, scrap metal and steel, industrial non-destructive testing, etc.Ionizing radiation environment, personal acceptance dose monitoring, and protection situations.Sensor: GM counter tubeMeasurement range: 0.08 µSv–50 mSvMeasurement accuracy: -17% to +25% based on 137CsYbr>Battery life: 20 days (continuous measurement, no particle noise)Charging interface: TYPE-C interface (green LED is always on while charging, off when fully charged)Alarm response time Td: Alarm threshold deviation: -17%–+25%Function:1.The dose rate is measured in real time, and the cumulative dose is recorded simultaneously.2.With calibration function.3. The dose rate alarm threshold and the dosage alarm threshold can be set arbitrarily (continuously adjustable).4.The start time of the current dose accumulation can be viewed.5.With timing measurement function, it can be arbitrarily set between 00 and 999 hours.6. With overdose alarm function.7. Historical recording information of the last 10 measurements can be saved.8. With calendar clock function, it can ensure normal clock operation after shutdown.9. The battery level is continuously monitored with a battery level icon.10. Free switching between Chinese and English menus.11. With sensor failure prompt function (the screen indicates that the device is damaged)12. When the recorder is turned on and the screen is off, if it detects that the radiation dose exceeds the set alarm value, the monitor will automatically alarm. It will automatically move to the radiation measurement page.1.Start:When the instrument is off, press and hold button II for 3 seconds to complete the startup process. The main interface will then be displayed.2.Shutdown:Press and hold button II for 3 seconds to complete the shutdown process.Note: If the lock icon appears at the top of the screen, it cannot be disabled.If it is off, please go to the timer measurement page and click to stop the timer. This will stop the timer and turn it off.3.Radiation Measurement:The instrument enters the main interface. Click on the radiation measurement to display the instantaneous value, average value, cumulative dose value, and cumulative measurement time.4. Synchronization MeasurementEnter the synchronization measurement menu to set the start delay from 0 to 99 hours, and the measurement duration can be set from 0 to 999 hours.Click to start the timer. The device starts counting down. When the start delay countdown returns to zero, the average value of the instantaneous value and the accumulated dose of the accumulated time are reset to zero at the same time. And the device starts counting the radiation dose and cumulative dose rate. After the measurement time counts down, the device automatically stores the interval measurement data. The measured data can be found in the history. Note: The start delay is the countdown to start the measurement, which can be set in hours, minutes and seconds. Click to start the timer measurement to enter the countdown, and the countdown ends to start the measurement. Package list: 1 x detector 1 x data cable 1 x tool kit 1 x cord 1 x user manual< /p>