Automatic Watering Timer G3/4, Female Thread, Programmable LCD Display, Digital Irrigation Water with Rain Sensor for Tap

Features: 1. Programmable: The watering timer can be set to be on for up to 599 minutes at intervals of 1 to 30 days. And 8 timing control programs can be set. Intelligent support, with unlimited duration of temporary activation function.2. Large Screen & Waterproof: The automatic watering timer adopts a large LCD screen, which is convenient to view the set data. The battery compartment has a waterproof seal design, as well as a switch loop to fix the battery compartment for reinforcement purposes.3. Filter and rain sensor design: The threaded connector of the faucet has a filter design, which is easy to use without clogging and makes the controller last longer. When the rain sensor is triggered, it will automatically stop the current task, easy to use.4.Two Thread Interface Types: This irrigation controller itself, with a G3/4 female thread, is also equipped with a G1/2 adapter, making it easy to connect using two threaded taps.5.Easy to Install: No tools required, simply attach the irrigation timer to the tap. It's easy and simple to use.No need to worry about your plants, lawn, garden, or farmland when you're away on business trips, weekend vacations, or visiting friends or relatives.Specifications:Item Type: Irrigation TimerMaterial: ABSProduct Size: Approx.150 x 92 x 47 mm / 5.9 x 3.6 x 1.9 inchesGross Weight: Approx. 318 g/11.2 ozController Thread: G3/4 FemaleAdapter Thread: G3/4 Male to G1/2 FemaleApplications: Cooling, Irrigation, Landscaping.This product is suitable for patios, balconies, indoor green walls, three-dimensional micro-sprinklers, drip irrigation systems, and automatic infiltration irrigation control products.1.Battery (batteries not included): Uses 2 AA alkaline dry cell batteries.2.8 timer control programs can be set.3.Can set a maximum operating time of 599 minutes, with intervals from 1 to 30 days.4.Features a large LCD screen.5. With unlimited duration of the temporary opening function.Notes: Suitable for water pressure of 1 to 8 kg, flow rate of 500 to 1700 L/H, suitable for water temperature of 1 to 50 ℃.Setting steps:1. For initial setup, press the Menu Off button to access the Current Time setting. Use the UP or DOWN button to set the hour, press OK, then use the UP or DOWN button to set the minutes. Press OK again to confirm and complete the setting.2.Automatically enter the watering start time setting.Use the UP or DOWN button to set the time, press OK Set, and then use the UP or DOWN button to set the minutes.Press OK Set again to confirm and complete the setting.3.Automatically enter the Watering Duration setting.Set the watering time from 1 second to 599 minutes (maximum 9 hours 59 minutes) using the UP or DOWN button.Press OK to confirm the setting.4.Automatically enter the Interval Days setting. Set the watering frequency from 1 to 30 days using the UP or DOWN button.Press OK to confirm the setting.5.For manual watering, press Manual, then use the UP or DOWN button to set the watering duration.Press OK to confirm.To stop manual watering, press Menu Off to return to automatic mode.6.In full screen with no settings displayed (relevant parameters not flashing), press "UP" or "DOWN" to display "P1" to "P8".8 timing procedures at any time; press "Confirm" to set the timing.Press "UP" or "DOWN" to display "P1" to "P8" 8 timer programs at any time; press "Confirm" to set the timer.At the same time, press and hold the "UP" and "DOWN" buttons to open/close the child lock function. The lock icon appears when the child lock function is open; the icon disappears when the child lock function is closed. At the same time, press and hold the "UP" and "DOWN" buttons to open/close the child safety function. At the same time, press and hold the "UP" and "DOWN" buttons simultaneously to activate/deactivate the rain function. The rain icon will appear to indicate that the rain function is activated, and it will disappear to indicate that the rain function is deactivated.Package List:1 x Watering Timer (battery not included)1 x Adapter1 x User ManualNote:After manually unlocking, wait 3 seconds before operation.1.Due to the different water needs of plants in each season, it is best to reset the irrigation schedule for each season to suit the water needs of plants.2. Due to the impurities in tap water, there is a stainless steel filter inside the connection, which should be cleaned in time to avoid blockage.3. This product is not frost resistant. Below 1℃, please disassemble it and drain the internal water for storage. It cannot be used if it is frozen and cracked.4. It must be installed vertically in front and cannot be installed upside down or horizontally.5. In full screen without setting state (no flashing of relevant setting items), press UP or DOWN to display timer program P1 to P8 8 at any time, press OK to set the timer.Press and hold the UP and DOWN buttons simultaneously to deactivate the child lock function. The appearance of the lock icon indicates that the child lock function ha