Cordless Automatic Pool Cleaner Robot with Dual Inlet Suction and 200μm Fine Filtration for Above Ground Flat Pools

Automatic Pool Cleaner Robot Cordless Swimming Pool Cleaner with 2 Water Inlet Suction Ports, 200 micrometer Fine Filter and Powerful Suction for Above and In Ground Flat Pools up to 100 square meters Quick overview This cordless automatic pool cleaner reduces time spent on manual skimming and vacuuming. It is designed for flat pool floors in both above ground and in ground installations, handling pools up to 100 square meters. Two water inlet suction ports and a 200 micrometer fine filter capture small debris while the unit runs automatically, leaving pool surfaces cleaner with minimal effort. Key benefits Save time and effort: Automatic operation cleans the floor without constant supervision or manual vacuuming. Effective debris removal: 200 micrometer fine filter traps fine particles such as sand, algae fragments, and silt for clearer water. Improved cleaning coverage: Two water inlet suction ports increase intake area and help pick up debris more efficiently than single inlet designs. Cordless convenience: No trailing power cord simplifies placement and setup and avoids cable management around the pool. Simple maintenance: Easytoaccess filter and straightforward emptying keep upkeep quick and user friendly. Wide compatibility: Suitable for flatbottom pools both above ground and in ground, up to 100 square meters. Main features and function Automatic cleaning mode for continuous floor maintenance. Two water inlet suction ports for higher debris intake and better coverage. 200 micrometer fine filter to capture small particles and reduce load on pool filtration. Powerful suction to remove common pool debris including leaves, insects, sand, and sediment. Cordless design for flexible use and easy handling. Designed for flat pool floors; not intended for sloped pool surfaces. Performance and design notes Designed to operate in flatbottom residential pools up to 100 square meters. Compact and lightweight for easy placement, removal, and storage. Sturdy construction intended for regular pool use; components are accessible for cleaning the filter and routine maintenance. Operates without a tethered power cable, simplifying service and placement near pool edges. Practical use scenarios Weekly maintenance for a backyard pool: Run the cleaner a few times per week to reduce manual vacuuming and keep the floor of settled debris. After a storm or heavy leaf fall: Use the cleaner to remove sand, leaves, and small twigs quickly, reducing load on the main pool filtration system. Between swim sessions at a small public or community pool: Start an automatic cycle between uses to maintain a clean and pleasant swimming surface. How to use Place the cleaner on the flat pool floor and switch it on. Allow the unit to run until the surface appears clean or until the recommended cycle time for your pool size has elapsed. Remove the cleaner, open the filter compartment, and empty the 200 micrometer filter of trapped debris. Store the unit in a dry, protected location until the next use. Compatibility and suitability For above ground and in ground pools with a flat bottom. Recommended for pools up to 100 square meters. Not intended for pools with steep slopes, deep diving areas, or extensive step systems. What makes this product stand out The combination of dual inlet suction and a fine 200 micrometer filter balances strong debris removal with fine particle capture. Cordless automatic operation reduces setup complexity and increases placement flexibility. Designed specifically for flat pool floors and mid sized pool areas, delivering targeted cleaning performance for residential and similar settings. This pool cleaner provides a practical, easy to use solution for routine pool floor maintenance in flatbottom pools up to 100 square meters, reducing manual work and improving day to day water clarity.