200W 2 Way Speaker Crossover with 2600Hz Precise Frequency Separation for 8 Ohm 10 Inch Speaker

Product overview A crossover unit with a fixed crossover frequency at 2600 Hz, designed to separate midrange and frequencies for twoway speaker systems. Rated for use with 4 to 8 ohm speakers and capable of handling up to 200W of power. The filter uses a 12 dB per octave slope to provide a smooth, controlled transition that helps improve driver conversion rates. Key benefits Precise frequency separation: The 2600 Hz crossover point provides a clear handoff between midrange and tweeter, helping to reduce overlap and maintain clearer imaging. Controlled slope for reliable performance: The 12 dB per octave filter characteristic delivers a moderate, predictable rollout that balances protection and sound continuity. Wide compatibility: Works with speaker drivers rated from 4 ohm to 8 ohm and with amplifiers up to 200W, making it suitable for common home, car, and small PA applications. Driver protection and system efficiency: By directing only appropriate frequencies to each driver, the crossover helps reduce strain on frequency drivers and supports more efficient use of amplifier power. Simple integration: Designed to be installed inline between amplifier output and speaker drivers for straightforward crossover implementation. Technical highlights Crossover frequency: 2600 Hz Impedance range: 4 to 8 ohm Maximum power handling: 200W Filter characteristics: 12 dB per octave slope to improve conversion rates Compatibility and function Compatible with 4 ohm and 8 ohm midrange and tweeter drivers. Suitable for use with amplifiers that deliver up to 200W per channel. Intended for twoway speaker configurations where a 2600 Hz crossover point provides the desired division between midrange and frequencies. Physical attributes and installation notes Compact form factor that fits into typical speaker enclosures or mounting locations. Intended for inline wiring between amplifier and speaker drivers; observe correct polarity and impedance matching during installation. No specific material or mounting dimensions are required for basic selection; confirm physical fit and wiring accessibility for the intended enclosure or installation location. Practical applications Home audio twoway speaker upgrades: Add a dedicated crossover to passive bookshelf or custombuilt speakers to improve driver handoff and clarity in the critical mid region. Invehicle component speaker systems: Use the crossover when integrating separate midrange and tweeter drivers to ensure each driver receives the appropriate frequency band while protecting the tweeter. Small venue or portable PA systems: Implement in compact twoway speaker cabinets to provide consistent crossover behavior and reliable power handling up to 200W. What to check before Confirm speaker driver impedance falls within the 4 to 8 ohm range. Verify the amplifier can be matched to the speakers without exceeding the 200W maximum power rating. Ensure a 2600 Hz crossover point aligns with the desired acoustic tuning for the specific drivers being used. This crossover provides a straightforward, reliable solution for achieving a clean frequency split at 2600 Hz with a 12 dB per octave slope, compatible with 4 to 8 ohm drivers and systems up to 200W.