HCV10 RS485 MultiParameter Soil Sensor Probe Moisture Temperature EC pH NPK IP68 Waterproof Tester for Agriculture

Color: Hcv10 Important reminder The NPK measurement uses a general rapid detection method and may have some error. Use NPK readings for planting reference only. The sensor supports writing NPK data: you can measure NPK with a standard instrument and write those values into the sensor to provide reference data for the monitoring system. Overview The CWTSOIL CWTsoil probe measures soil temperature, moisture, pH, conductivity (EC), and optional NPK concentration. It is designed for longterm burial, with corrosionresistant stainless steel construction and vacuumpotting for full waterproof performance and resistance to electrolysis. Fast response and stable output make it suitable for continuous field or greenhouse monitoring. Key benefits Multiparameter monitoring in one probe: temperature, moisture, pH, EC, and optional NPK. Longterm, buried use: stainless steel probe, corrosion resistance, and IP68 protection. Flexible outputs: RS485, 420 mA, 05 V, and 010 V for integration with data loggers and controllers. Fast response and reliable readings for timely decision making. Supports manual NPK calibration by importing labgrade measurements into the probe for improved monitoring accuracy. Main specifications Model: CWTsoil Color: Hcv10 Measured parameters: Temperature, Soil humidity (moisture), Conductivity (EC), pH, Nitrogen Phosphorus Potassium (NPK) Temperature: range 40 to 80 C; accuracy: ±5(25); longterm stability: 0.1% per year; response time: 15 s Humidity: range 0 to 100% RH; accuracy: 2% within 050% RH, 3% within 50100% RH; longterm stability: 1% RH per year; response time: 4 s Conductivity (EC): range 0 to 20000 us/cm; accuracy: ±3% (010000 us/cm), ±5% (1000020000 us/cm); longterm stability: 1 us/cm per year; response time: 1 s pH: range 3 to 9 pH; accuracy: ±0.3 pH; longterm stability: 5% per year; response time: 10 s NPK: range 1 to 1999 mg/kg (mg/L); resolution 1 mg/kg (mg/L); response under 1 s Power supply: DC 4.5 to 30 V Power consumption: 0.5 W at 24 V DC Output options: RS485, 420 mA, 05 V, 010 V Protection class: IP68, suitable for longterm immersion Cable length: default 2 m Operating environment: 40 to 80 C Dimensions: 45 x 15 x 123 mm Design and build Stainless steel probe and robust structure provide long service life when buried. Vacuum potting and full waterproofing for reliable operation in wet soils. Small footprint and compact probe for easy installation and minimal soil disturbance. Fast, stable data output suitable for automated systems. Installation and use Insert the probe about 3 to 5 inches (10 cm) into soil and wait 10 to 15 seconds for readings. Do not force the probe into very dry, compacted soil; moisten or loosen soil before insertion if . For higher NPK accuracy, use standard laboratory instruments to measure NPK and write those values into the sensor memory for monitoring. Configuration and display A 4.3 inch HMI touch screen is available as a configuration tool: 4.3 inch, 480 x 272 resolution Power 9 to 30 V DC Connects to a single RS485 soil sensor Compatible with: HS, THS, THCS, THPHS, CPHS, THCPHS, NPKTHPHS, NPKPHS, NPKPHCS, NPKPHCTHS Not compatible with: PHS, NPKS Dashboard and curve monitoring, onscreen calibration, supports up to 1900 logs with configurable logging interval, and export to SD card Typical applications Field agriculture: continuous monitoring of soil conditions for irrigation scheduling and nutrient management. Greenhouse and nursery operations: soil condition monitoring to optimize watering and fertilization for seedlings and potted plants. Research plots and agronomy trials: reliable multiparameter data collection for soil studies and sensorbased experiments. Landscaping and sports turf management: maintain consistent moisture and soil quality for healthy turf areas. Additional features Compact and easy to install, operate, and maintain. Reasonable structural design to ensure probe longevity. measurement accuracy and fast response for efficient data collection. What is included CWTsoil soil sensor probe (color Hcv10) with default 2 m cable. Configuration tool and HMI display sold separately where required. Notes Use NPK data with caution for planting decisions due to the rapid detection method variability. To improve NPK monitoring accuracy, import laboratorymeasured NPK values into the sensor memory for reference.