Heavy Duty Geotextile Fabric 3ft x 100ft Roll for Driveway Stabilization and Erosion Control

Heavy duty geotextile fabric designed for construction grade erosion control and load bearing applications. Key benefits strength and durability: 8 oz density material with 350N tensile strength for reliable performance under heavy loads and traffic. Construction grade permeability: allows drainage while providing separation and filtration. Suitable for use beneath concrete or pavement where water must pass through. Durable and resistant: PP nonwoven construction that is erosionproof, dampproof, and tearproof compared with common woven ground covers. Easy to use: lightweight rolls that are simple to carry, cut to size, and install for fast jobsite setup. Specifications and function Material: PP nonwoven Density: 8 oz Tensile strength: 350N Primary purpose: heavy load bearing, traffic erosion control and subgrade separation Not designed as a weed barrier Common applications Drainage and filtration: French drain lining to keep soil and aggregate separated while maintaining flow. Pavement and concrete subbase: underlayment beneath concrete, asphalt, or pavers to stabilize subgrade and reduce mixing of base materials. Erosion control and retaining structures: separation layer for riprap channels, retaining walls, and traffic construction areas. Installation notes Unroll onto prepared surface, trim with utility knife or shears to fit project dimensions, and secure as required by site conditions. Overlap seams according to project specification to maintain separation and filtration performance. Intended for structural and drainage use; do not rely on this fabric as a primary weed prevention solution. This geotextile fabric provides a practical, strength solution for construction drainage, separation, and erosion control projects where load capacity and permeability are required.