Digital Vibration Meter SW65A with Reliable Piezo Sensor, Triple Parameter Display for Machinery Maintenance

Digital Vibration Meter SW65A Overview A handheld vibration tester designed for quick, accurate assessments of equipment condition and fault diagnosis. The SW65A uses a piezoelectric accelerometer sensor to convert vibration into electrical signals, then processes and displays acceleration, velocity, and displacement values on an easytoread LCD. The compact, portable design improves maintenance efficiency, helps protect equipment, and supports routine inspections across industrial settings. Key benefits Fast condition checks: Get acceleration, velocity, and displacement readings on site to identify abnormal vibration before failures occur. Portable and easy to use: Lightweight handheld unit with long and short probes for access to various measurement points. Multiparameter output: Displays peak acceleration, true RMS velocity, and peaktopeak displacement for comprehensive vibration analysis. Reliable sensor technology: Piezoelectric accelerometer provides stable response across specified frequency bands. Data saving: Store up to 200 measurement records for later review. Main features Model: SW65A Sensor: Piezoelectric accelerometer Acceleration range: 0.1199.9 m/s2 (peak) Velocity range: 0.1199.9 mm/s (True RMS) Displacement range: 0.0011.999 mm (peaktopeak) Measurement accuracy: plus/minus (5% + 2 digits) Low frequency acceleration band: 10 Hz1 kHz frequency acceleration band: 1 kHz10 kHz Velocity frequency band: 10 Hz1 kHz Displacement frequency band: 10 Hz500 Hz Data refresh time: 500 ms Internal memory: 200 records Power: 2 x 1.5 V AAA batteries Battery life: Continuous use greater than 4 hours Operating temperature: 0 to 50 C Storage temperature: 20 to 60 C Working humidity: 20% RH to 80% RH Storage humidity: 20% RH to 80% RH Size: 176 x 54 x 25 mm Net weight: 121 g Altitude: under 2000 m Practical applications and scenarios Routine machinery maintenance: Quickly measure bearing or rotor vibration on pumps, motors, fans, and gearboxes to detect imbalance, misalignment, or bearing wear. Power generation and electric equipment inspection: Monitor generators, transformers, and switchgear supports to identify developing vibration issues that affect performance. Manufacturing and vehicle production lines: Spotcheck assembly line equipment, presses, or vehicle powertrains during commissioning or preventive maintenance to maintain production quality. Package contents 1 handheld vibration meter (SW65A) 1 long probe 1 short probe 1 sling 1 manual 1 gift box Precautions Do not use in temperature or humidity environments beyond specified ranges. Avoid use near corrosive substances or chemical gases. Do not expose the instrument to water or allow it to be wet. Store and operate within the stated temperature and humidity limits. Why choose the SW65A Delivers the core vibration measurements needed for condition monitoring in industrial environments. Compact, batterypowered design for inspections without external power. Clear display and data storage make onsite checks and record keeping straightforward. Your satisfaction is a priority. If you encounter any quality issues or are not satisfied with the product, contact the seller for assistance as described in the documentation.